Fuel Pump!

Need technical Q/A then you're in the right place

Moderator: martauto

marty1979
E30 Zone Newbie
E30 Zone Newbie
Posts: 108
Joined: Mon Nov 06, 2006 11:00 pm
Location: Bristol

Post Fri Nov 10, 2006 6:19 pm

Evening all, hope someone can help me with this one. Now I know my fuel pump needs replacing as it's mega noisy, but unlike other cars I've had, when I turn the ignition on I don't hear anything from the pump, like it priming itself. Why is this? Thanks in advance
garyp_E30_325i
E30 Zone Regular
E30 Zone Regular
Posts: 724
Joined: Mon Jun 20, 2005 11:00 pm
Location: Sunny (I wish!) Glasgow

Post Fri Nov 10, 2006 6:31 pm

You should hear the pump priming, if it's not priming it's probably gone (or the fuse / relay has gone) but then the car wouldn't start. What model you got? If it's got an external pump under the car maybe you won't hear it. I've got the in-tank pump and so long as you pause the ignition key you can hear it prime.
'89 325i - was an SE but not anymore, was bronze-beige metallic (yeuch!) but now techno-violet (thankfully)
'89 Toyota Corolla GTi-16 - track, hillclimb & sprint car (yeeha!)
'08 Buell XB12Ss - American engineering at it's 'best'... good fun though
marty1979
E30 Zone Newbie
E30 Zone Newbie
Posts: 108
Joined: Mon Nov 06, 2006 11:00 pm
Location: Bristol

Post Fri Nov 10, 2006 6:35 pm

Hi thanks for the quick reply. It's a 1988 320i, as you say if it was a fuse or relay problem it wouldn't start, but it starts and runs ok with only slight hesitation and power loss, to be expected from a dodgy pump.
garyp_E30_325i
E30 Zone Regular
E30 Zone Regular
Posts: 724
Joined: Mon Jun 20, 2005 11:00 pm
Location: Sunny (I wish!) Glasgow

Post Fri Nov 10, 2006 6:51 pm

A '88 320i should have an in tank pump (I think?), so if everything is off and you turn the key to the on position and leave it you should hear the pump prime from just behind the drivers seat. You need to take the rear seat out to get to the inspection panel above the tank, there's a tech article on how to change a fuel pump posted by 320Touring:
http://www.e30zone.net/modules.php?name ... chfuel.htm
'89 325i - was an SE but not anymore, was bronze-beige metallic (yeuch!) but now techno-violet (thankfully)
'89 Toyota Corolla GTi-16 - track, hillclimb & sprint car (yeeha!)
'08 Buell XB12Ss - American engineering at it's 'best'... good fun though
Chris-W
E30 Zone Team Member
E30 Zone Team Member
Posts: 7219
Joined: Tue May 24, 2005 11:00 pm
Location: South Cheshire

Post Fri Nov 10, 2006 6:53 pm

Let me know if you need a (good) used pump.

Cheers,
Chris
Image
marty1979
E30 Zone Newbie
E30 Zone Newbie
Posts: 108
Joined: Mon Nov 06, 2006 11:00 pm
Location: Bristol

Post Fri Nov 10, 2006 6:57 pm

Thanks for your help guys, this site is awesome :D
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Fri Nov 10, 2006 9:39 pm

Could an early '88 320 have the two pump set up?
If it has, a noisy external pump is normally the result of a failed transfer pump in the tank.
marty1979
E30 Zone Newbie
E30 Zone Newbie
Posts: 108
Joined: Mon Nov 06, 2006 11:00 pm
Location: Bristol

Post Sat Nov 11, 2006 8:28 am

That's interesting, what would the symptoms of a failed transfer pump be, other than a noisy fuel pump?
Chris-W
E30 Zone Team Member
E30 Zone Team Member
Posts: 7219
Joined: Tue May 24, 2005 11:00 pm
Location: South Cheshire

Post Sat Nov 11, 2006 9:07 am

Where is the noise coming from? Try pulling the rear seat base out to check if it's the in tank pump.
Image
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sat Nov 11, 2006 9:46 am

Is there a pump in front of the left hand rear wheel?
AFAIK, failed transfer pump doesn't cause any real symptoms, other than the noise and eventual early demise of the main pump.
marty1979
E30 Zone Newbie
E30 Zone Newbie
Posts: 108
Joined: Mon Nov 06, 2006 11:00 pm
Location: Bristol

Post Sat Nov 11, 2006 1:40 pm

Ok, I pulled the pump out and stared at it for a bit 8O, put it back in and it's not making noise anymore. Still doesn't prime before ignition though. Any ideas?
User avatar
cyborgguy
E30 Zone Newbie
E30 Zone Newbie
Posts: 1
Joined: Thu Dec 07, 2006 11:00 pm

Post Fri Jan 19, 2007 8:51 pm

My 88 320i is the same it doesn't prime with the ignition switched to on before starting.
It is also hard to start sometimes. (I have already replaced distributor cap and rotorarm.)
If I short out the fuel pump relay I can hear the fuel pump so I know it's definately not priming before startup as I can't hear anything.
Any idea's as to why it wouldn't prime?