hi all
i no that there is a diif location(325) with the sensor between the erly one and the later engine, as erlyer engine of mibe is gssed and the new 1 is the later version with the sensor on the front pully what would be involved with changing them over been told that the sump may be differant and req swopping any help welcome
maney thanks
jon
crank sensor
Moderator: martauto
-
jone325isport
- E30 Zone Newbie
- Posts: 27
- Joined: Sat Apr 08, 2006 11:00 pm
- Location: chesterfield
-
Ant
- Retired Team Member
- Posts: 10496
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: PD+E dept :D
swop the early front pulleys over to the later engine and pop her in dude
the pulse sensors are mounted to the gearbox so no real issues there
the sumps are the same, but the oil level sensor will need swopping for the early unit with the round plug, no nightmare, just do it before popping the new engine back in, easier access and all that.
HTH
the pulse sensors are mounted to the gearbox so no real issues there
the sumps are the same, but the oil level sensor will need swopping for the early unit with the round plug, no nightmare, just do it before popping the new engine back in, easier access and all that.
HTH
Product Development and Endurance for Delphi.
Original performance chips, original works not unlicensed copies
Email FTW
Original performance chips, original works not unlicensed copies
Email FTW