which HT leads are best for 6 cylinder ?
Moderator: martauto
-
alane
- E30 Zone Regular
- Posts: 258
- Joined: Mon Jun 19, 2006 11:00 pm
- Location: erdington birmingham
Which ht leads are best for 325i 1989 F reg ?
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
The ones that it left the factory with! If those are physically damaged, then an OE set from a scrapper.
-
alane
- E30 Zone Regular
- Posts: 258
- Joined: Mon Jun 19, 2006 11:00 pm
- Location: erdington birmingham
thanks for the info .the ones on there are damaged but im unsure if the are original or not they have 7mm silicone written on them suspect not original ?
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
OE are usually Beru and have the lead numbers printed on them in blue, IIRC.
Sounds like you may have aftermarket rubbish, so get down to the scrappy.
I've tested many OE sets, and never found a dud one yet.
Wife's 325 touring uses it's original 250,000 mile leads and runs on LPG, and there is nothing like LPG to show up deficiencies in an ignition system.
Sounds like you may have aftermarket rubbish, so get down to the scrappy.
I've tested many OE sets, and never found a dud one yet.
Wife's 325 touring uses it's original 250,000 mile leads and runs on LPG, and there is nothing like LPG to show up deficiencies in an ignition system.