rev counter

Need technical Q/A then you're in the right place

Moderator: martauto

e30cossie
E30 Zone Regular
E30 Zone Regular
Posts: 482
Joined: Sat May 20, 2006 11:00 pm

Post Thu Nov 02, 2006 8:08 pm

I need to wire up my rev counter .can anyone tell me what colour wire joins to the back of the clocks or is there a easier place to join the wire.
any info will be a great help.
tomtomiS
E30 Zone Camper
E30 Zone Camper
Posts: 1216
Joined: Sun Aug 21, 2005 11:00 pm
Location: Cricket Hill, Yateley

Post Thu Nov 02, 2006 8:13 pm

in what way do u mean wire it up, there's a couple of multiplugs that go into the back of the clocks
e30cossie
E30 Zone Regular
E30 Zone Regular
Posts: 482
Joined: Sat May 20, 2006 11:00 pm

Post Thu Nov 02, 2006 8:19 pm

I have a cosworth engine loom and the green wire is for the rev counter so there must be a wire from the dash clock rev counter and was wondering what colour this is.thanks
Andy335Touring
Married to the E30 Zone
Married to the E30 Zone
Posts: 7144
Joined: Sun Jan 09, 2005 11:00 pm
Location: Long Eaton,Nottingham

Post Thu Nov 02, 2006 8:59 pm

Solid Black wire on one of the two plugs i think
tomtomiS
E30 Zone Camper
E30 Zone Camper
Posts: 1216
Joined: Sun Aug 21, 2005 11:00 pm
Location: Cricket Hill, Yateley

Post Thu Nov 02, 2006 10:09 pm

if im right then the the plug u need is the one behind the rev counter, found out the other day that the plug on right ( blue??) does the electrics and bulbs for right hand side and the one on the left (white plug??) does the left. pardon me if im havin a blonde moment!!
eko
Old timer
Posts: 11531
Joined: Sat Feb 05, 2005 11:00 pm
Location: South Devon

Post Thu Nov 02, 2006 10:12 pm

Can it not be wired into the C101 plug under the bonnet?
Ian332i or Brianmoore will be able to tell you for sure :)
Image
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Fri Nov 03, 2006 12:18 am

BMW ECUs have an output to drive the rev counter. On an E30 it's a black wire which goes through pin 9 (IIRC), of the C101 connector.
No idea if the Ford signal is compatible, but there are others with cosworth engined E30s on the forum who should be able to tell you.