anyone give directions to RESET ,OBC,AS CAR REFUSES TO START
Moderator: martauto
-
skunkgreenbmw
- E30 Zone Newbie
- Posts: 73
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: manchester area
HELP,managed to keep hold of directions on how to reset the obc for about 3yrs,and after valeting the car and it running without needing code to start,its suddenly after all this time it goes twilight on me jut like the directions and key points,to reset,and need to be out riding in her also managed to lose the locking nut key after having a puncture and still have a pancake wheel on rear to all the rest of the m3 motorsport copys,gutted and i can get them off for love nor money/cheers jonny
-
HartgeH27
- E30 Zone Team Member
- Posts: 21737
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: Chichester
PM sent
-
skunkgreenbmw
- E30 Zone Newbie
- Posts: 73
- Joined: Thu Apr 27, 2006 11:00 pm
- Location: manchester area
left battery off couple of hours and still no joy?any other ideas anyone
-
beardymat
- E30 Zone Squatter
- Posts: 1979
- Joined: Tue Jun 14, 2005 11:00 pm
- Location: sheffield, city of steel, and rust apparently
the immobiliser from the obc connects above the glove box,should be a white two pin plug with green wires if i remember correctly. (cue brian moore) unplug it and bridge the connection from the car loom (not the obc) and it should start.cars not fitted with obc`s just had a loop of wire in the connector.
No longer self employed but still available for welding duties.
-
dannosail
- E30 Zone Newbie
- Posts: 210
- Joined: Fri Jul 15, 2005 11:00 pm
- Location: South Devon
I agree with Matt. When I removed the OBC from my saloon I just shorted the 2 pin connection with a piece of wire and the card started fine.
Hope it works
Hope it works