did Hartge make a 16 inch 7J with offset ET 20?
(Mine are 7.5J offset ET24... or offset ET25 actually - it's from memory ok?)
thanks
genuine Hartge wheel question
Moderator: martauto
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
Last edited by orangecurry on Tue Oct 31, 2006 10:50 am, edited 1 time in total.
-
Ziggy
- E30 Zone Team Member

- Posts: 11534
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: floating round my tin can...
Doubtless no help whatsoever, but mine are 7.5J ET20! 
E30 in need of wiring loom smoke since April '11...
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
are you sure? Oh hang on are they the ones in your sig pic? Split rims?
-
billgatese30
- E30 Zone Team Member

- Posts: 10989
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Tyne & Wear
they sure are, and very nice they are too
-
Ziggy
- E30 Zone Team Member

- Posts: 11534
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: floating round my tin can...
Yup - made by Oz, so it's pretty irrelevant to your question, sorry! 
E30 in need of wiring loom smoke since April '11...
-
Theo
- Old Skooler

- Posts: 10735
- Joined: Wed Jun 01, 2005 11:00 pm
- Location: Kent
You can get 7x14, 7x15 and 7.5x16 in the one piece style. You can also get a 1 piece 8.5x16 rim for the M3.
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
so NOT 7x16 as far as you know?
-
Theo
- Old Skooler

- Posts: 10735
- Joined: Wed Jun 01, 2005 11:00 pm
- Location: Kent
No, not by the looks of it. If you go to www.e30.de and look at the bottom of the menu on the left you will find loads of info on Hartge as well as all the other tuners.
Out of interest, do you have a 7x16 rim, or want one? Or just really bored?
Out of interest, do you have a 7x16 rim, or want one? Or just really bored?
-
Ziggy
- E30 Zone Team Member

- Posts: 11534
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: floating round my tin can...
... or found some for sale somewhere... 
E30 in need of wiring loom smoke since April '11...
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
Ziggy is wise
the thing is, I asked the seller ages ago to read off the numbers/letters under the centre caps, and he came back and said 'these wheels are E30 fitment', so I asked the same question again and have had no reply.
the thing is, I asked the seller ages ago to read off the numbers/letters under the centre caps, and he came back and said 'these wheels are E30 fitment', so I asked the same question again and have had no reply.
-
HartgeH27
- E30 Zone Team Member

- Posts: 21737
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: Chichester
Hartge did not have any 7 x 16 defo.orangecurry wrote:so NOT 7x16 as far as you know?
The offset for the 7.5 x 16 is 25 whilst the offset for the 7 x 15 is 26.
HTH
Iain
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
thanks Iain
-
Demlotcrew
- E30 Zone Team Member

- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
Dont forget 7.5x16 for the front on the M3Theo325 wrote:You can also get a 1 piece 8.5x16 rim for the M3.
Andrew


