Question time! Diff men please

Need technical Q/A then you're in the right place

Moderator: martauto

TW166Y
E30 Zone Addict
E30 Zone Addict
Posts: 3118
Joined: Wed Jun 08, 2005 11:00 pm
Location: Stoke (Clayheads)

Post Tue Oct 31, 2006 12:40 am

right fella's ive heard a couple of people mention that the have bought old dogs of e34 535's and used the getrag and the diff on there m3 to save paying silly bmw prices or paying through there nose for second hand parts.....

My question is, If these fella's can use a 535 diff, why cant i use it on my m30 conversion?

because surley if you can fit an m3 diff onto a standard e30, in theory the 535 should also fit a standard e30. Please help me figure this out because its driving me up the wall! Or is it a simple case of there actually being a couple of different sizes???

Sorry for posting another pointless post but i just need this answered as im a bit thick :roll:


thanks :D :cool:
Image
Saying goodbye to 4-pot wrongness
SPADGE
Married to the E30 Zone
Married to the E30 Zone
Posts: 7373
Joined: Wed Aug 09, 2006 11:00 pm
Location: Milton Keynes, Bucks

Post Tue Oct 31, 2006 1:33 am

M3's run 5 bolts hubs and different drive shafts mate and i'm sure there will be other reaons!
EOS
E30 Zone Newbie
E30 Zone Newbie
Posts: 215
Joined: Wed Oct 19, 2005 11:00 pm
Location: Eastwood - Essex

Post Tue Oct 31, 2006 7:02 am

Not sure if the hubs and drive shafts would be an issue, because when i changed to Z3 rear arms, all i did was change the CV on the drive shaft end going onto the E30 diff and it all mated up nicely. The splines on the drive shafts were the same for the E30 and Z3 drive shafts. don't know if that helps.
Image
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Tue Oct 31, 2006 7:14 pm

There are 2 different sizes of E28 diffs Twigg, the smaller one fits an E30 and is the same size as the large E30 diffs

The large E28 diff is just absolutley masive in all aspects :) The drive shaft cups are like dinner plates :)
Demlotcrew
E30 Zone Team Member
E30 Zone Team Member
Posts: 13329
Joined: Mon Dec 20, 2004 11:00 pm
Location: East Anglia

Post Wed Nov 01, 2006 8:09 am

But both do fit!

Andrew
TW166Y
E30 Zone Addict
E30 Zone Addict
Posts: 3118
Joined: Wed Jun 08, 2005 11:00 pm
Location: Stoke (Clayheads)

Post Wed Nov 01, 2006 8:28 pm

DanThe wrote:There are 2 different sizes of E28 diffs Twigg, the smaller one fits an E30 and is the same size as the large E30 diffs

The large E28 diff is just absolutley masive in all aspects :) The drive shaft cups are like dinner plates :)
im talking about my e34 535 here lads :mad: ... will the diff fit my e30? i know the e28 ones do but what about the e34 ones?
Image
Saying goodbye to 4-pot wrongness
TW166Y
E30 Zone Addict
E30 Zone Addict
Posts: 3118
Joined: Wed Jun 08, 2005 11:00 pm
Location: Stoke (Clayheads)

Post Wed Nov 01, 2006 8:30 pm

i personally think ive crossed wires somewhere, but where i dont know :?
Image
Saying goodbye to 4-pot wrongness
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Wed Nov 01, 2006 10:47 pm

No mate, I should of read what you wrote really :)
Demlotcrew
E30 Zone Team Member
E30 Zone Team Member
Posts: 13329
Joined: Mon Dec 20, 2004 11:00 pm
Location: East Anglia

Post Thu Nov 02, 2006 7:09 am

E34 nono!

You can make it fit but with alot of welding.
TW166Y
E30 Zone Addict
E30 Zone Addict
Posts: 3118
Joined: Wed Jun 08, 2005 11:00 pm
Location: Stoke (Clayheads)

Post Sat Nov 04, 2006 12:14 pm

Demlotcrew wrote:E34 nono!

You can make it fit but with alot of welding.

ahhhhh, andrew is it "worth" welding it up so its matched or am i just best off using the 3.64 lsd ive bought. ta mate
Image
Saying goodbye to 4-pot wrongness
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Wed Nov 08, 2006 1:24 pm

525i and 535i Sports after G plate (H plate onwards) use an E30 type diff (Type 188) from which the LSD pack can be removed and fitted into an E30 325i casing. The E34 casing won't fit an E30 rear beam. Earlier E34 535i's used the E32 735i diff which is f*cking enormous, like something off a Coach.
User avatar
gooner1
Out humping Reindeer
Posts: 13280
Joined: Fri Apr 14, 2006 11:00 pm
Location: Northampton.For my sins.

Post Thu Dec 21, 2006 11:49 am

So if im using an M3 prob in a 325i conversion what lsd diff can i use.Engine will be a e34 535i sport and 730i manual gearbox with hopefully a e28 535i clutch.Mongerel or what.
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Fri Dec 22, 2006 4:45 am

Mongerel or what
if it was a dog it would have a red bandana tied round its neck and hang out in pedestrian underpasses.....but it would be faithful!!!
Image
User avatar
gooner1
Out humping Reindeer
Posts: 13280
Joined: Fri Apr 14, 2006 11:00 pm
Location: Northampton.For my sins.

Post Fri Dec 22, 2006 7:58 am

mrLEE30 wrote:
Mongerel or what
if it was a dog it would have a red bandana tied round its neck and hang out in pedestrian underpasses.....but it would be faithful!!!
Have to say MrLEE that in its present form it has never let me down .
Am i right in thinking that whatever diff i use that it has to be an E3o one?.
jonb
E30 Zone Addict
E30 Zone Addict
Posts: 3732
Joined: Sun Jan 09, 2005 11:00 pm
Location: bristol

Post Fri Dec 22, 2006 12:16 pm

TW166Y wrote:right fella's ive heard a couple of people mention that the have bought old dogs of e34 535's and used the getrag and the diff on there m3 to save paying silly bmw prices or paying through there nose for second hand parts.....

My question is, If these fella's can use a 535 diff, why cant i use it on my m30 conversion?

because surley if you can fit an m3 diff onto a standard e30, in theory the 535 should also fit a standard e30. Please help me figure this out because its driving me up the wall! Or is it a simple case of there actually being a couple of different sizes???

Sorry for posting another pointless post but i just need this answered as im a bit thick :roll:


thanks :D :cool:

pete

christ. just put the e30 diff on there.

your fucking around to much to save about £5....
Andy335Touring
Married to the E30 Zone
Married to the E30 Zone
Posts: 7144
Joined: Sun Jan 09, 2005 11:00 pm
Location: Long Eaton,Nottingham

Post Fri Dec 22, 2006 1:18 pm

jonb wrote:
TW166Y wrote:right fella's ive heard a couple of people mention that the have bought old dogs of e34 535's and used the getrag and the diff on there m3 to save paying silly bmw prices or paying through there nose for second hand parts.....

My question is, If these fella's can use a 535 diff, why cant i use it on my m30 conversion?

because surley if you can fit an m3 diff onto a standard e30, in theory the 535 should also fit a standard e30. Please help me figure this out because its driving me up the wall! Or is it a simple case of there actually being a couple of different sizes???

Sorry for posting another pointless post but i just need this answered as im a bit thick :roll:


thanks :D :cool:

pete

christ. just put the e30 diff on there.

your ******* around to much to save about £5....
Old thread Jon bumped back up by gooner1's Q's
johnl320
E30 Zone Addict
E30 Zone Addict
Posts: 3124
Joined: Mon Jan 10, 2005 11:00 pm
Location: Hampshire

Post Fri Dec 22, 2006 5:45 pm

gooner1 wrote:
mrLEE30 wrote:
Mongerel or what
if it was a dog it would have a red bandana tied round its neck and hang out in pedestrian underpasses.....but it would be faithful!!!
Have to say MrLEE that in its present form it has never let me down .
Am i right in thinking that whatever diff i use that it has to be an E3o one?.
I know you can use a E28 525e diff if you change the backplate and output flanges but they are tall ( mines 3.07 ) so probably only good for 1:1 fifth gear gearboxes

HTH
ed325i
E30 Zone Addict
E30 Zone Addict
Posts: 4146
Joined: Mon Jan 10, 2005 11:00 pm

Post Fri Dec 22, 2006 5:51 pm

This part of what you have to do to fit a e34 diff.

Image
fuzzy
He who sleeps with "Gingers"
Posts: 14351
Joined: Sat Jun 04, 2005 11:00 pm
Location: melbourne Australia

Post Fri Dec 22, 2006 5:58 pm

i notice that the 1048 bhp e30 in this months PBMW uses an e34 m5 diff diff with a custom prop but doesnt have any pics or details of how it was fitted :?
ed325i
E30 Zone Addict
E30 Zone Addict
Posts: 4146
Joined: Mon Jan 10, 2005 11:00 pm

Post Fri Dec 22, 2006 6:24 pm

Image
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Fri Dec 22, 2006 9:14 pm

What driveshafts can you use with this diff?
Andyboy
Alpina Colada
Posts: 12577
Joined: Mon Sep 11, 2006 11:00 pm
Location: Notts

Post Sat Dec 23, 2006 11:41 am

If it's the later 535i diff, E30 outputs and shafts. But seeing as it uses the same 188 internals as a regular 325i diff it would be totally and utterly pointless. You'd be pissing around for days and days fitting a diff which is no stronger than the one you have. :mad:

The older stronger diff (Type 210) has bigger outputs so you'd need custom shafts with E34 inner CV's. But then you still need a custom rear diff mount and you still need to make up a new diff mounting on the axle beam. Yeah, righto.

If you really, really needed a 210 diff, any E28 535i LSD, avaible for about £100, will bolt directly into an E30 rear beam, as will an E28 M5 diff - making the E34 diff thing a total and utter waste of time.