I'm looking for a set for my '86 M3.
Does anyone have any recommended setups/makes?
Budget is circa Ԛ£600.
TIA
James.
E30 M3 Coilovers.
Moderator: martauto
-
M5pilot
- E30 Zone Addict

- Posts: 4968
- Joined: Sun Jan 30, 2005 11:00 pm
- Location: Luton
The cheapest decent coilovers probably going to be the KW Variant 1's at Ԛ£759.
Sal
Sal
-
f13ldy
- E30 Zone Newbie

- Posts: 72
- Joined: Mon Jul 17, 2006 11:00 pm
Ouch.
Seeing that I only need them to give me exact height I need, am I likely to see any benefits over a decent spring and shock set?
Seeing that I only need them to give me exact height I need, am I likely to see any benefits over a decent spring and shock set?
-
M5pilot
- E30 Zone Addict

- Posts: 4968
- Joined: Sun Jan 30, 2005 11:00 pm
- Location: Luton
If it's justfor road use then you'll not really reap the benefits over a normal good suspension kit.
What kind of height are you trying to achieve lower than standard?
Sal
What kind of height are you trying to achieve lower than standard?
Sal
-
f13ldy
- E30 Zone Newbie

- Posts: 72
- Joined: Mon Jul 17, 2006 11:00 pm
Probably just by looking at my current arch gaps. I imagine a 60/40 drop.
However, on previous cars, I found that they don't always drop it how i'd like it. So this time around I thought maybe the extra expense on coilovers would be justified, so I can get it to a level that I'm happy with.
Bearing in mind I'm looking at getting some 9.5/10 inch wide wheels (on the rear) under there in the near future as well...
However, on previous cars, I found that they don't always drop it how i'd like it. So this time around I thought maybe the extra expense on coilovers would be justified, so I can get it to a level that I'm happy with.
Bearing in mind I'm looking at getting some 9.5/10 inch wide wheels (on the rear) under there in the near future as well...
-
jpboost
- E30 Zone Newbie

- Posts: 163
- Joined: Tue Apr 26, 2005 11:00 pm
- Location: Croydon
Gaz coilovers come highly recommended at around Ԛ£7-800 . There are quite a few people using them on their track m3's now.
-
M5pilot
- E30 Zone Addict

- Posts: 4968
- Joined: Sun Jan 30, 2005 11:00 pm
- Location: Luton
They are pretty good too. We have supplied a few sets for a few track cars now. Little bit above the budget here though and maybe a little too hardcore.
The KW V1's are only ride height adjustable and are setup for the road so would be ideal.
Given that it is true that most lowering is variable on cars I would recommend you go for the KW V1's.
Drop me a PM or give me a call and I can get a set organised for you.
Sal
The KW V1's are only ride height adjustable and are setup for the road so would be ideal.
Given that it is true that most lowering is variable on cars I would recommend you go for the KW V1's.
Drop me a PM or give me a call and I can get a set organised for you.
Sal
-
f13ldy
- E30 Zone Newbie

- Posts: 72
- Joined: Mon Jul 17, 2006 11:00 pm
Sal,
Thanks mate.
Just got to find another Ԛ£200 and I'll be in touch.
Cheers
James.
Thanks mate.
Just got to find another Ԛ£200 and I'll be in touch.
Cheers
James.
-
LeeInMontreal
- E30 Zone Newbie

- Posts: 7
- Joined: Sat Oct 14, 2006 11:00 pm
Have you checked Ground Control in the US?
4 x Eibach springs (pick any rate you want) + 4 threaded collars and adjusters for $400usd
Then add some adjustable aluminum camber plates for $350usd
If you currently have decent shocks like Bilsteins Sport, all you need to do is to cut the spring perch, weld a ring and install the springs.
BTW Read Gustave's excellent install.
http://e30m3performance.com/installs/GC ... _susp1.htm

You can see my coil-overs in the back... I also use tender springs to keep the main ones in their perches when the car is jacked. In some countries, it is mandatory that springs stay firmly in their perches at all time. Perhaps MOT requires the same. My tender springs come from Carrera. Eibcah makes some too.

4 x Eibach springs (pick any rate you want) + 4 threaded collars and adjusters for $400usd
Then add some adjustable aluminum camber plates for $350usd
If you currently have decent shocks like Bilsteins Sport, all you need to do is to cut the spring perch, weld a ring and install the springs.
BTW Read Gustave's excellent install.
http://e30m3performance.com/installs/GC ... _susp1.htm

You can see my coil-overs in the back... I also use tender springs to keep the main ones in their perches when the car is jacked. In some countries, it is mandatory that springs stay firmly in their perches at all time. Perhaps MOT requires the same. My tender springs come from Carrera. Eibcah makes some too.

-
UweM3
- E30 Zone Squatter

- Posts: 1657
- Joined: Sun Jul 03, 2005 11:00 pm
Careful here! I have converted a set with parts available from Demon tweeks (Ford Escort coil over kit). basically the same thing as ground control, but a bit lesser quality for the adjustable spring platforms.LeeInMontreal wrote:Have you checked Ground Control in the US?
4 x Eibach springs (pick any rate you want) + 4 threaded collars and adjusters for $400usd
Then add some adjustable aluminum camber plates for $350usd
If you currently have decent shocks like Bilsteins Sport, all you need to do is to cut the spring perch, weld a ring and install the springs.
BTW Read Gustave's excellent install.
http://e30m3performance.com/installs/GC ... _susp1.htm
With a stock lenght strut insert you will run out for suspension travel as soon you lower it just a little bit. To prevent the top spring collar to hit the strut collor nut you need to fit bump stop to limit the travel or the use of really really hard springs. (min 600lbs, MIN!)
Riding on the bump stops is a very bad idea IMO. Bilsteins do have the bump stop internally (upside down design) so you won't be able to adjust this without dismantling the shock.
Two ways to get round this:
1) buy shorter inserts from Ground control and cut the strut 1" shorter before you weld the threade collar on.
2) install a solid top mount to loose some ride height in the first place (assuming the solid mount is of lesser stack height that the BMW rubber mount).
Another thing to keep in mind is the poor quality of the demon tweeks parts in terms of corrosion/rust.
My collar nuts have seized solid in 3 month of road use.
Also keep in mind the rear tyre wear (and the loss of traction) if you lower too much.
Springs are available from Faulknersprings in the UK
-
harry_p
- Engaged to the E30 Zone

- Posts: 5313
- Joined: Thu Oct 12, 2006 11:00 pm
- Location: norfolk
surely if your overall lowering isnt too much you wont run out of travel? off the shelf kits will lower 60mm at the front, and must still have a bit oftravel, i dont see why you'd want to go lower than this on anything other than a racecar. from reading about the GC topmounts they do have a considerably shorter stack height than other setups.
i would love a coilover setup, spring kits never seem to work out quite right, always seem to be a compromise.
the main thing that puts me off the GC kit is the rear spring setup as they use normal type springs which will drop out if you have both wheels off the ground at the same time. asside from the obvious risks it's also an mot fail.
i wonder if kw or h&r will sell you just a rear setup and GC their front system?
my cars are used all year round so siezing up is a serious matter and i have no idea which kits are most resistant. i had some gaz coilovers on another car and their corosion resistance was worryingly bad.
i would love a coilover setup, spring kits never seem to work out quite right, always seem to be a compromise.
the main thing that puts me off the GC kit is the rear spring setup as they use normal type springs which will drop out if you have both wheels off the ground at the same time. asside from the obvious risks it's also an mot fail.
i wonder if kw or h&r will sell you just a rear setup and GC their front system?
my cars are used all year round so siezing up is a serious matter and i have no idea which kits are most resistant. i had some gaz coilovers on another car and their corosion resistance was worryingly bad.
-
Rich_W
- E30 Zone Addict

- Posts: 2932
- Joined: Mon Jan 10, 2005 11:00 pm
Sal
Would you say H&R are better or worse that KW when it comes to Coilovers?
Would you say H&R are better or worse that KW when it comes to Coilovers?

