Its the trim that houses the front indicaters and numberplate - mine was ripped off and cracked by some bint in a 4x4 on Friday, will be ordering a new one once I've got the scrapes on the wing sorted
Black front bumper trim Q?
Moderator: martauto
-
Razza
- E30 Zone Regular
- Posts: 296
- Joined: Mon Jan 10, 2005 11:00 pm
Does this just clip in or does it need to be professionally fitted?
Its the trim that houses the front indicaters and numberplate - mine was ripped off and cracked by some bint in a 4x4 on Friday, will be ordering a new one once I've got the scrapes on the wing sorted
Its the trim that houses the front indicaters and numberplate - mine was ripped off and cracked by some bint in a 4x4 on Friday, will be ordering a new one once I've got the scrapes on the wing sorted
-
Cava
- E30 Zone Regular
- Posts: 349
- Joined: Sat Nov 19, 2005 11:00 pm
- Location: South Wales
You should be ok - the centre and side sections just clip in. To be honest, they can be more difficult to remove intact than they are to fit.
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Exactly as above! Dead easy to fit, absolute pig to get off without breaking a fixing clip ot two
-
gareth
- E30 Zone Team Member
- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
thirded!
before fitting the new one, make sure there are no bits of broken clip stuck in the bumper from the old one. they hide well!
before fitting the new one, make sure there are no bits of broken clip stuck in the bumper from the old one. they hide well!
Sole founder of Fe2O3-12V it's a lifestyle
LSD rebuilding / modification services provided, PM for details
LSD rebuilding / modification services provided, PM for details