Hi
I have a set of New 40mm lowering springs and wondered if the standard Boge Gas shocks would be ok to fit with them.
As i have some new Boge shocks in the shed just doing nothing so just need to buy the back ones.
Any one got this set up and can tell me how the car rides would be great
Thanx
Boge shocks and 40mm lowering springs
Moderator: martauto
-
alan325i
- E30 Zone Regular
- Posts: 369
- Joined: Mon Feb 14, 2005 11:00 pm
- Location: Yardley, Birmingham
-
Bally
- E30 Zone Camper
- Posts: 1012
- Joined: Sat Jan 15, 2005 11:00 pm
- Location: Slough
Hi, 325 auto , lowered 40 mm , just replacing front dhock with boge gas ones also changing strut mount and bump stop and brakes and discs, hoping to finish tommorrow will lety you.
(see help under technical havinfg problems getting strut apart)
(see help under technical havinfg problems getting strut apart)
-
alan325i
- E30 Zone Regular
- Posts: 369
- Joined: Mon Feb 14, 2005 11:00 pm
- Location: Yardley, Birmingham
Tell me about it, took a set to pieces ready to rebuild when i found out which shocks to put in them
One side came to pieces pretty easy, the other what a pain in the ass the thing that holds the shock in was rusted solid
but lots of WD40, hitting with hammer and alot of 4 letter words and the thing eventually budged 
One side came to pieces pretty easy, the other what a pain in the ass the thing that holds the shock in was rusted solid
but lots of WD40, hitting with hammer and alot of 4 letter words and the thing eventually budged