I have fitted the new style blades today.
Obviously these are the standard champion blades (pic for referance purposes):


The new blades:


The blades are really simple, Just the rubber section with a metal inner which is curved, and the mount. Also seemed to have some sort of graphite coating.
I made sure the screen was as clean as i could get it, Started with panel wipe to degrease the screen, then used t-cut glass polish (the only product i had that was abrasive), and a second clean with panel wipe.

I then applied Rain-x, I know to do a fair trial i should have just fitted the blades but i normally rain-x every few months anyway.
Fitting the blades was as easy as any other blade, clipped straight on with no issues at all. Clip felt nice and secure with no play.
Fitted pics:


Fit really well, and after a little test with a hose, clear the screen very very well. No smearing and no judder at all, quiet on the change of direction too. 10/10 from me.
Finally thanks to my lovely assistant


Oh and i thought i'd get a picture of my white plate on the rear, not quite legal!












