Does anyone know whether a Braided hydraulic clutch hose is available for a E30 325i and if so where can i get one from??
Cheers
Pav
Braided hydraulic clutch hose?
Moderator: martauto
-
Turbo-Brown
- Boost Junkie
- Posts: 4705
- Joined: Tue Feb 15, 2005 11:00 pm
- Location: Aldershot, Hants
You could probably make one up, although why would you want to?
When I replaced my clutch lines, I didn't wanna pay BMW the Ԛ£60 odd quid for the proper one so I made one up using the rear brake flexi hose from a 205 1.9 GTi, some copper brake line and the relevant M10x1 brake fittings.
Seems to work fine
When I replaced my clutch lines, I didn't wanna pay BMW the Ԛ£60 odd quid for the proper one so I made one up using the rear brake flexi hose from a 205 1.9 GTi, some copper brake line and the relevant M10x1 brake fittings.
Seems to work fine
)-
Si316
- E30 Zone Squatter
- Posts: 1810
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Cheshire
A company called jaymic do one. Im not sure how much of an advantage it is but I did mine as it needed replacing.
-
325zimmer
- E30 Zone Newbie
- Posts: 98
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Ruislip, London
I found out that Goodridge do a replacement hydraulic clutch hose. So I've orded it via Rally Design Ԛ£20.60 posted. Not bad.
I will have to see what its like when it arrives, anyway its a lot cheeper than a BMW one!!
I will have to see what its like when it arrives, anyway its a lot cheeper than a BMW one!!
