E30 touring what can i do?
Moderator: martauto
-
whipsey
- E30 Zone Addict

- Posts: 3731
- Joined: Wed May 25, 2005 11:00 pm
- Location: kettering
nearly forgot the accelerator pedals not attached to the floor is this a weld on part ?
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Why can't you open the tailgate? Key not fit that lock? Is the key slot vertical or horizontal/
I suggest you sort the central locking first, since if that works it may unlock the tailgate. Use the forum search button, and enter "red AND black" and my username, and you will find several threads telling you how to fix it.
Accelerator pedal sounds like it's broken at the hinge. They are one piece plastic, with the hinge just being flexible plastic, and clip into a rectangular metal slot welded to the floor. They are not meant to be removable without breaking them, and are available cheaply enough from the dealer, or ask for one in "E30 parts wanted".
If the electric roof seems reluctant to work, remove the inspection panel under the motor, slacken the big nut a couple of turns, and insert an allen key tool that should be in the toolkit into the centre hole. Use this to work the roof over and back a little at a time, assisting the roof with your hand if necessary, until it frees up and you can lubricate it properly.
I suggest you sort the central locking first, since if that works it may unlock the tailgate. Use the forum search button, and enter "red AND black" and my username, and you will find several threads telling you how to fix it.
Accelerator pedal sounds like it's broken at the hinge. They are one piece plastic, with the hinge just being flexible plastic, and clip into a rectangular metal slot welded to the floor. They are not meant to be removable without breaking them, and are available cheaply enough from the dealer, or ask for one in "E30 parts wanted".
If the electric roof seems reluctant to work, remove the inspection panel under the motor, slacken the big nut a couple of turns, and insert an allen key tool that should be in the toolkit into the centre hole. Use this to work the roof over and back a little at a time, assisting the roof with your hand if necessary, until it frees up and you can lubricate it properly.
-
whipsey
- E30 Zone Addict

- Posts: 3731
- Joined: Wed May 25, 2005 11:00 pm
- Location: kettering
ive tried the key in the lock but it dosnt seem to want to open
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Does the key turn in the lock? Does the button push in?
You can release the tailgate from the inside by using on open ended spanner to unscrew the U shaped hook on the bottom of the tailgate that engages with the catch on the body. You really need to have a look at another opened tailgate to see what to do.
You can release the tailgate from the inside by using on open ended spanner to unscrew the U shaped hook on the bottom of the tailgate that engages with the catch on the body. You really need to have a look at another opened tailgate to see what to do.
-
cougar
- E30 Zone Newbie

- Posts: 228
- Joined: Sat Mar 26, 2005 11:00 pm
- Location: HEATHROW
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Usual procedure is to bash the insides of a cat out with a steel bar.cougar wrote:
m8 where do you get a bypass pipe from
-
pacerpete
- E30 Zone Team Member

- Posts: 18165
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
Whipsey, that turd sounds like a trojan horse ? 
-
dips346
- London Meets Main Man
- Posts: 3977
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: heston/heathrow
power flow will do one matecougar wrote:m8 where do you get a bypass pipe frombigmattpowell wrote:I've got a K reg tourer too, if it's 92 it'll have a cat, bypass that to stop it stealing 10 of your 90 bhp. If not mtech 2 kit then SE skirts, IS lip
-
whipsey
- E30 Zone Addict

- Posts: 3731
- Joined: Wed May 25, 2005 11:00 pm
- Location: kettering
right ive found a few more probs one being the speedo isnt working and i've got a cracked rear lens full of water plus the osr seat wont fold down any help would be welcome
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
1/ Wire leading froom the diff broken internally near the plug. Gently stretch the individual wires.
2/ Replace the light. Same as facelift saloons.
3/ Swing up the seat base. There should be a lever underneath near the outer edge which comes up when you lift the base. This should make the little tab on top of the seat back (beside where the headrests would fit) pop up and allow the back to tilt over. The little lever can break off, as it's only held by two small spot welds.
Compare both sides, since you have one working one.
2/ Replace the light. Same as facelift saloons.
3/ Swing up the seat base. There should be a lever underneath near the outer edge which comes up when you lift the base. This should make the little tab on top of the seat back (beside where the headrests would fit) pop up and allow the back to tilt over. The little lever can break off, as it's only held by two small spot welds.
Compare both sides, since you have one working one.
-
whipsey
- E30 Zone Addict

- Posts: 3731
- Joined: Wed May 25, 2005 11:00 pm
- Location: kettering
i've got the touring booked in for an mot today its gonna fail unless im lucky just not sure what on lol im still having probs with my leccy windows the passenger side won't work at all now i've tried four different switches including the drivers one and it still wont drop. The central lockings not working either ive changed the control box but it might be dodgy as well lol
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Central locking: Use forum search button for "red AND black" and my username.
Window: Looks like it must be corrosion inside the passenger door plug and socket on the hinge pillar. Unusual for this particular pair of pins to corrode, but not unheard of. There's a big hole through the middle of the plug and socket for running wires right through from the door to the body if the plug and socket are too far gone to be repaired.
Window: Looks like it must be corrosion inside the passenger door plug and socket on the hinge pillar. Unusual for this particular pair of pins to corrode, but not unheard of. There's a big hole through the middle of the plug and socket for running wires right through from the door to the body if the plug and socket are too far gone to be repaired.
-
whipsey
- E30 Zone Addict

- Posts: 3731
- Joined: Wed May 25, 2005 11:00 pm
- Location: kettering
ok mot failed on brake pads front two tyres just under limit os mirror glass slight fuel leak two rear bushes and about four bulbs
-
whipsey
- E30 Zone Addict

- Posts: 3731
- Joined: Wed May 25, 2005 11:00 pm
- Location: kettering
just tried the red and black wire trick and guess what it didn't work lol
-
whipsey
- E30 Zone Addict

- Posts: 3731
- Joined: Wed May 25, 2005 11:00 pm
- Location: kettering
i need to change the two big bushes in the rear subframe for the mot as well any idea's
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Drag out the locking ECU from its hiding place, and connect a small 12V lamp (about 5W or so - I use an old E30 front indicator repeater lamp and its holder and wires) across the red/black and brown wires. This lamp should light at all times.whipsey wrote:just tried the red and black wire trick and guess what it didn't work lol
Rear subframe bushes are covered on here at least once a week. Can be anything from a job where everything goes smoothly to one that reduces you to a gibbering wreck. (Usually the latter).
-
whipsey
- E30 Zone Addict

- Posts: 3731
- Joined: Wed May 25, 2005 11:00 pm
- Location: kettering
central locking is sorted aprt from passenger front door so its def something loose or corroded the locking wa a quick fix there was a missing fuse lol
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
If you've done the red/black wire modification it'll pay dividends in the future.whipsey wrote:central locking is sorted aprt from passenger front door so its def something loose or corroded the locking wa a quick fix there was a missing fuse lol
Next question is: Why was the fuse missing? Hopefully it was borrowed for somewhere else!
-
whipsey
- E30 Zone Addict

- Posts: 3731
- Joined: Wed May 25, 2005 11:00 pm
- Location: kettering
ive got the passenger side working now took the loom apart and sprayed some 5 in 1 oil into there works perfect now windows and locks i did notice though that the wiring that goes from the glove box torch looked like it was burnt through would this be on the same fuse?
-
whipsey
- E30 Zone Addict

- Posts: 3731
- Joined: Wed May 25, 2005 11:00 pm
- Location: kettering
i need to find some rear sub frame bushes cant seem to find them on ecp or gsf sites whats the proper name for these?
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
i got a pair from ECP at the beginning of this year,im sure they were about Ԛ£18 eachwhipsey wrote:i need to find some rear sub frame bushes cant seem to find them on ecp or gsf sites whats the proper name for these?
-
whipsey
- E30 Zone Addict

- Posts: 3731
- Joined: Wed May 25, 2005 11:00 pm
- Location: kettering
do you know the number for them?
-
whipsey
- E30 Zone Addict

- Posts: 3731
- Joined: Wed May 25, 2005 11:00 pm
- Location: kettering
just a quick question how do you remove the mirror glass to replace it ive just tried to take one out of a spare mirror and made a right **** of it any help
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
If you've got one out, you should be able to see how you should have done it.
If you tilt the mirror fully upwards you should be able to see a few white cog like teeth at the bottom just behind the glass. You need to move these teeth about 10mm sideways to release the glass.
Official way is to insert a small flat blade screwdriver through a small hole in the underside of the mirror housing, and use this as a fulcrum to move the teeth.
I find it easier to slide the small screwdriver in directly under the glass once the mirror is tilted up. You can see what you're doing this way.
When refitting the glass, make sure you move the teeth fully to the locked position, or the glass will fall out after a few miles.
If you tilt the mirror fully upwards you should be able to see a few white cog like teeth at the bottom just behind the glass. You need to move these teeth about 10mm sideways to release the glass.
Official way is to insert a small flat blade screwdriver through a small hole in the underside of the mirror housing, and use this as a fulcrum to move the teeth.
I find it easier to slide the small screwdriver in directly under the glass once the mirror is tilted up. You can see what you're doing this way.
When refitting the glass, make sure you move the teeth fully to the locked position, or the glass will fall out after a few miles.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
If you get them from here, make sure they are in a red febi/bilstein box, which should be identical to dealer OE ones.whipsey wrote:i need to find some rear sub frame bushes cant seem to find them on ecp or gsf sites whats the proper name for these?
-
whipsey
- E30 Zone Addict

- Posts: 3731
- Joined: Wed May 25, 2005 11:00 pm
- Location: kettering
thanks for that are the mirror glasses swappale ie will the n/s fit the o/s?
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Torch is on fuse 21 (7.5A), which also feeds the interior lights, luggage compartment light, clock or OBC, memory feed for radio, and part of the instruments.whipsey wrote:i i did notice though that the wiring that goes from the glove box torch looked like it was burnt through would this be on the same fuse?
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Same both sides.whipsey wrote:thanks for that are the mirror glasses swappale ie will the n/s fit the o/s?
-
whipsey
- E30 Zone Addict

- Posts: 3731
- Joined: Wed May 25, 2005 11:00 pm
- Location: kettering
thats brilliant means i don't have to buy another one thanks
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Better revise that now that I'm awake to "no they're not".Brianmoooore wrote:Same both sides.whipsey wrote:thanks for that are the mirror glasses swappale ie will the n/s fit the o/s?
The glass is the same but the backing frame is handed.
Sure I've managed to fit them on the wrong side though.
-
whipsey
- E30 Zone Addict

- Posts: 3731
- Joined: Wed May 25, 2005 11:00 pm
- Location: kettering
do the backing frames come of then ?
-
whipsey
- E30 Zone Addict

- Posts: 3731
- Joined: Wed May 25, 2005 11:00 pm
- Location: kettering
car has just took a turn for the worst was doing some bits ready t ore mot it started the car up and let it idle for 5-10 mins and turned it off heard a hissing from the front of the top hose on the rad needs tightening up i thought had a quick check of the oil cap and guess what its full of grey gunk not very happy at all
-
d1mmy
- Boost Junkie
- Posts: 292
- Joined: Wed Oct 04, 2006 11:00 pm
- Location: Wembley
Thats a bargain. When you got it running sweet and tidy. Clean bodywork with Mtec2 or 318is splitter. Lowered on nice set of rims.
For sale 325i Sport Turbo & 318i (Sport) M50B25
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Where was the needle on the temperature gauge during all this?whipsey wrote:car has just took a turn for the worst was doing some bits ready t ore mot it started the car up and let it idle for 5-10 mins and turned it off heard a hissing from the front of the top hose on the rad needs tightening up i thought had a quick check of the oil cap and guess what its full of grey gunk not very happy at all


