Hi Guys, really daft question here, I have literally just started to swap the tubing, the T piece (one way valve) and also the water jets themselves. I have already been and bought the pieces only to find (upon opening the damn bonnet and REALLY checking) that the jets I have are the heated variety, so no doubt the cheap as chips ones I've just bought will not do and replacements will be Ԛ£Ã”šÃ‚£Ãƒ”šÃ‚£Ãƒ”šÃ‚£. Anyway, here's the daft question,:
HOW THE HELL DO I GET THE OLD JETS OUT???
On the non heated ones I've just bought (and will be taking back) there appears to be a spring clip either side which is pressed in and then the unit pulls out, on my heated ones I cannot see any such spring clips?.
HELP.
Red D
Ps, I've searched and no posts actually mention this and they all relate to non heated jets, so either I'm a total donut, or I am unique.....lol
Window Washer Jets
Moderator: martauto
-
reddevil
- E30 Zone Regular
- Posts: 414
- Joined: Mon Jul 04, 2005 11:00 pm
- Location: Stockton, Teesside, UK
-
Demlotcrew
- E30 Zone Team Member
- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
The heated ones come out the same way as the non.
Andrew
Andrew
-
wildeian
- E30 Zone Regular
- Posts: 851
- Joined: Thu Mar 09, 2006 11:00 pm
- Location: Colchester, Essex
Mine just pushed out from underneath!?! (325i sport)
-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
twist slightly
-
reddevil
- E30 Zone Regular
- Posts: 414
- Joined: Mon Jul 04, 2005 11:00 pm
- Location: Stockton, Teesside, UK
Right Guys, sorted it, the non heated ones the clips are on the sides, the heated ones the clip is on the bottom, it then levers out.
Thanks for the tips, best get on so I can see out the damn screen again....lol
Red D
Thanks for the tips, best get on so I can see out the damn screen again....lol
Red D