Newbie here with 323i

Show off your pride and joy here

Moderator: martauto

User avatar
PiperZero
E30 Zone Newbie
E30 Zone Newbie
Posts: 147
Joined: Mon Nov 21, 2005 11:00 pm
Location: Kuala Lumpur, Malaysia

Post Thu Oct 12, 2006 4:13 am

Hello folks, Been going thru this forum for some time, and learning new stuff everyday! Finally got the courage to put up pics of my ride. Its a 1984 323i, M20B23/25 (tell you later - dodgy history) with manual tranny. Used to run 14" bottlecaps, but just put on these 17"x7.5" a few weeks ago. Stock engine, stock suspension, leather-like interior.
Image

Paint is still 22 years old, and the white smears are from water dripping down from my basement roof parking bay (paintjob coming soon!).

Can anyone advise me where to put up pics for the install of these rims? I had to use 22mm adaptors since the rims are 4x114.8 pattern.

Thanks!
User avatar
PiperZero
E30 Zone Newbie
E30 Zone Newbie
Posts: 147
Joined: Mon Nov 21, 2005 11:00 pm
Location: Kuala Lumpur, Malaysia

Post Thu Oct 12, 2006 4:20 am

Here's a pic of the rims with tyres. They're 17"x7.5", offset 38 (for Jap cars), and running Michelin 205/45-17s.

Image
User avatar
PiperZero
E30 Zone Newbie
E30 Zone Newbie
Posts: 147
Joined: Mon Nov 21, 2005 11:00 pm
Location: Kuala Lumpur, Malaysia

Post Thu Oct 12, 2006 4:26 am

Sorry for the lame pic, had greasy hands and didn't want to stain the missus' digicam.

Mild steel, 8 bolt pattern to suit 4x100 (countersunk to mate to BMW hub), and 4x114.8 for mating to the rims. Hub-centering spigot has 57.5mm ID (my measurements gave 0.2mm clearance left and right, over the original 57.1mm size). OD of the adaptor is 140mm, and 22mm thickness.

Image
User avatar
Lennerd320i
E30 Zone Newbie
E30 Zone Newbie
Posts: 249
Joined: Sun Jul 23, 2006 11:00 pm
Location: Leuven - Belgium

Post Thu Oct 12, 2006 12:18 pm

hi, welcome to the zone ;) having any other plans with the car?
ed325i
E30 Zone Addict
E30 Zone Addict
Posts: 4146
Joined: Mon Jan 10, 2005 11:00 pm

Post Thu Oct 12, 2006 3:18 pm

Hi, Good to see another 323 8) chrome bumbers how e30's should be :cool:
I am not to keen on the wheels :roll:
User avatar
PiperZero
E30 Zone Newbie
E30 Zone Newbie
Posts: 147
Joined: Mon Nov 21, 2005 11:00 pm
Location: Kuala Lumpur, Malaysia

Post Thu Oct 12, 2006 3:28 pm

Lennerd - thanks! Well, at the moment, just want to get it running healthy again. So, things like vacuum leaks, busted SI board, cranky wiper on 1st setting, etc. Just finished replacing the exhaust system from the mid point (beneath the driver's seat) all the way to the back. Plus driver's seat that's slanted to the left because of wonky upright bracket....the normal stuff... :o

Ed - the price for the wheels were too good to pass up, and I know that the 17s would muck up the handling a bit. Don't mind it, at least until I find good 15" rims... :P
dazleeds
old skool raver
old skool raver
Posts: 12883
Joined: Fri Apr 01, 2005 11:00 pm
Location: Empire Building @

Post Thu Oct 12, 2006 3:31 pm

welcome fella

dnt mind the wheels so much but think youll find the cars gonna tramline all over the place with 22mm spacers :eek:
www.oldskoolfantasy.co.uk
in the shit,the one to blame,yeh its all my fault ;)
User avatar
Lennerd320i
E30 Zone Newbie
E30 Zone Newbie
Posts: 249
Joined: Sun Jul 23, 2006 11:00 pm
Location: Leuven - Belgium

Post Thu Oct 12, 2006 3:31 pm

good to see that the car will be treated well ;) I'm wondering what the result will be after you've done everything :D
User avatar
PiperZero
E30 Zone Newbie
E30 Zone Newbie
Posts: 147
Joined: Mon Nov 21, 2005 11:00 pm
Location: Kuala Lumpur, Malaysia

Post Thu Oct 12, 2006 4:21 pm

Dazleeds - :D with the roads down here, it has caught me out more times than not! The excuse of 'I've got a super responsive steering rack that out-thinks the driver's steering commands' works well for my missus...I'd love to find proper 4x100 ET20 15", but needs a lot of searching in them scrappies....

Lennerd - Used to have a 2dr 320i with a sticking AFM, and valves hitting the pistons, yet I still love these models. Hopefully, once I'm done with it (which may take some time :P ) it'll still remain in the family. At the moment, it's a weekend car, since I ride a bike to work.... 8)
Pal318is
E30 Zone Addict
E30 Zone Addict
Posts: 3494
Joined: Fri Jan 14, 2005 11:00 pm
Location: Kop End - Bedford

Post Thu Oct 12, 2006 10:56 pm

Looking good bud, do watch the tramlining though...More pic's too fella.... :thumb:

Pal
Pal

Image[img]http://Image
M42's Run in the Family...The kids sayin 'YNWA'
User avatar
PiperZero
E30 Zone Newbie
E30 Zone Newbie
Posts: 147
Joined: Mon Nov 21, 2005 11:00 pm
Location: Kuala Lumpur, Malaysia

Post Fri Oct 13, 2006 3:01 am

Pal318is - that's one sharp looking BMW you have there, AZEV rims I presume? Wish I could get mine as clean as yours... 8O Pics would be uploaded, as my next contribution would be for changing the driver's door lock and still use the same key for all doors!