Fitting Twin tone horns

[samr]

Hi All
As you may well know, 318i's only have a single tone horn, which I find quite embaressing!
Just wondering if I buy the second deeper tone horn, how do I wire it/mount it to the car?
Apparently it goes above the front fog lamps?

Any help much appreciated
Cheers
Sam

[Brianmoooore]

The double horn set up on an E30 uses a different main car body wiring loom and a different bodyshell, so I doubt if you'll be fitting them in an OE manner.
Easiest way is to stick both horns on the same stud behind the grill in a sort of inverted V arrangement, and just wire them in parallel.

[samr]

Many thanks for your advice Brianmooooooooore
Cheers

[320Touring]

slightly off topic, but any advice to sort the "dying cow" horn on my newly aquired iS?

[Brianmoooore]

slightly off topic, but any advice to sort the "dying cow" horn on my newly aquired iS?

There's a stopped up hole with an adjuster in it on top of the horn, which may bring it back to life for a while, but I've never found it very successful as a long term fix.

[stevo]

slightly off topic, but any advice to sort the "dying cow" horn on my newly aquired iS?

must better than my road runner effort! meep

go to the scrappy's and get a twin tone off a modern rep mobile, they seem to have good uns!

[Brianmoooore]

New OE horns from BMW aren't particularly expensive, IIRC.

[320Touring]

slightly off topic, but any advice to sort the "dying cow" horn on my newly aquired iS?

must better than my road runner effort! meep

go to the scrappy's and get a twin tone off a modern rep mobile, they seem to have good uns!

you'll hear it on sunday

I fancy a dukes o hazzard one