Can anyone help please ? i'm trying to pull a set of leather seats apart and i've fallen at the first hurdle.
On standard seats you just remove the 2 screws on the back panel and it pulls off, but on these you take the screws out and the damn thing just stays in place (2 door with the side handles). Can anyone tell me which bit i have to force, first ?
Recaro Seats ?
Moderator: martauto
-
Martinaston
- E30 Zone Addict

- Posts: 3749
- Joined: Mon Mar 14, 2005 11:00 pm
- Location: London
There is NO nucleus.
-
thebigone
- E30 Zone Regular

- Posts: 294
- Joined: Sat Jul 29, 2006 11:00 pm
- Location: Newhaven (south coast)
is it not a case of being held on by clips that slot in and you push it up 
-
kevin316i
- E30 Zone Regular

- Posts: 783
- Joined: Mon Jan 10, 2005 11:00 pm
You need to lift it up after you clear the handles. On the seat with one handle, you can slip the back panel off OK, but on the seat with two handles, you will need to remove one of the handles first. You can try stretching the panel sideways to clear the handles, but you may damage it.
-
Martinaston
- E30 Zone Addict

- Posts: 3749
- Joined: Mon Mar 14, 2005 11:00 pm
- Location: London
at Ԛ£70 each i won't be damaging them i'll tell ya
trouble is with the screws out and the handles off they don't move at all
cheers
trouble is with the screws out and the handles off they don't move at all
cheers
There is NO nucleus.
-
dips346
- London Meets Main Man
- Posts: 3977
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: heston/heathrow
the side handle/knob will pull off first then the surroud clips in with,and then look in and you should see screws for the side metal hand and it comes off

