best diff for turbo conversion
Moderator: martauto
-
jambaps
- E30 Zone Newbie

- Posts: 20
- Joined: Sat Sep 16, 2006 11:00 pm
what diff sould i use for a 1.8 turbo converion (ca18det from a 200sx s13 to put it in to my 1985 e30 ? with the m10 engine 1766 cc carb ?
-
jambaps
- E30 Zone Newbie

- Posts: 20
- Joined: Sat Sep 16, 2006 11:00 pm
should also mention the engine is about 350 bhp
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
ive got a 3.91 lsd on mine and it does the job. im more interested in acceleration than top end speed though so if your after top end get a lower ratio such as 3.64 or less.i dont understand how it works but thats what ive been told 
-
Andy335Touring
- Married to the E30 Zone

- Posts: 7144
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Long Eaton,Nottingham
What gear box ratios will you be using ?
Have a play with this.
http://www.unixnerd.demon.co.uk/revs.html
Have a play with this.
http://www.unixnerd.demon.co.uk/revs.html
-
WerkdE30
- E30 Zone Newbie

- Posts: 208
- Joined: Thu Jan 26, 2006 11:00 pm
- Location: Melbourne
350 horses from a ca18 good luck with that. cough cough bullsh*t cough
-
Taxin
- E30 Zone Newbie

- Posts: 142
- Joined: Sun Jul 02, 2006 11:00 pm
- Location: Skelmersdale
Hey cough cough bullsh*t cough BMW did get 1470 horses from a 1.5 m10 block but 350 would be hard to get without spending loads of money
BMW E30 Convertible - 2.5


-
d6dph
- Married to the E30 Zone

- Posts: 12435
- Joined: Sun Aug 14, 2005 11:00 pm
- Location: Tiptree. Essex
WerkdE30 wrote:350 horses from a ca18 good luck with that. cough cough bullsh*t cough

-
dan_emaps
- E30 Zone Regular

- Posts: 302
- Joined: Wed Aug 17, 2005 11:00 pm
Agreed, and some. If your not sure what you talking about fella then keep opinions like that to yourself. hardly helpful is it.d6dph wrote:WerkdE30 wrote:350 horses from a ca18 good luck with that. cough cough bullsh*t coughIts been done, yes they may not be the strongest engine (tend to like chewing big end bearings) but thats attainable.
Guess it depends on where you want your speed in regards to the diff dude.
-
Patm3
- E30 Zone Regular

- Posts: 768
- Joined: Fri Jul 08, 2005 11:00 pm
- Location: Southeast London
know a guy who has this figure on his 200sx spent Ԛ£10,000 but that also upgraded everything that needed upgrading like brakes, discs etc, the car is also for sale for Ԛ£10,000
-
jambaps
- E30 Zone Newbie

- Posts: 20
- Joined: Sat Sep 16, 2006 11:00 pm
fyiWerkdE30 wrote:350 horses from a ca18 good luck with that. cough cough bullsh*t cough
here we go
forged pistons
racing cams
lighted and balanced bottom end
t35 hybrid turbo
z32 afm
444 injectors for a skyline
front mount intercooler
stage three chip
uprated fuel pump
hks adjustable actuator
3 inch exhaust from turbo back
apex induction kit
347 bhp 0-60 4.9 seconds
so before you start do some research already have the engine out of the 200sx i just scrapped
-
jambaps
- E30 Zone Newbie

- Posts: 20
- Joined: Sat Sep 16, 2006 11:00 pm
also check the sxoc and look at buffys s13 he is running 500 bhp
