3:73 lsd

Post Mon Sep 25, 2006 4:49 pm

3:73 lsd, will this work ok with an m30 conversion. Not really clued up about diff's so any info would be magic. thanks fella's

Post Mon Sep 25, 2006 5:01 pm

You need a 3.64 or a 3.46, you might find first is too short with a 3.73, i've got a 3.64 but i want to swap for 3.46 because it's a bit short geared for me.

The above assumes E32/34 gear box and you have tyres that maintain stock rolling radius

Post Mon Sep 25, 2006 5:44 pm

I have a Z3 3.45 LSD if it's of interest.

Cheers,
Chris

Post Mon Sep 25, 2006 5:47 pm

What sort of dosh are you after ?

Sorry i've got to ask but is it in good nick/no whines/etc ?

Post Mon Sep 25, 2006 5:48 pm

A Z3 with a LSD?

The only Z car that came with real LSD's were the Z///M ones.

Andrew

Post Mon Sep 25, 2006 5:50 pm

Demlotcrew wrote:A Z3 with a LSD?

The only Z car that came with real LSD's were the Z///M ones.

Andrew

Talking of 3.46's did you ask your mate ?

Post Mon Sep 25, 2006 5:54 pm

Demlotcrew wrote:A Z3 with a LSD?

The only Z car that came with real LSD's were the Z///M ones.

Andrew

I've touched it and it didn't disappear, so had thought it was real...

Post Mon Sep 25, 2006 7:00 pm

Demlotcrew wrote:A Z3 with a LSD?

The only Z car that came with real LSD's were the Z///M ones.

Andrew

I'm pretty sure the Z3 2.8i got an LSD too.

Mark.

Post Mon Sep 25, 2006 7:37 pm

The only Z car to have a clutch type LSD was the ///M coupe and ///M roadster.

The others had a trosen based LSD which is really no good.

HTH

Andy ill let you know.

Andrew

Post Mon Sep 25, 2006 7:44 pm

Demlotcrew wrote:The only Z car to have a clutch type LSD was the ///M coupe and ///M roadster.

The others had a trosen based LSD which is really no good.

But now you're changing the goal posts

Post Mon Sep 25, 2006 11:38 pm

Andy335Touring wrote:You need a 3.64 or a 3.46, you might find first is too short with a 3.73, i've got a 3.64 but i want to swap for 3.46 because it's a bit short geared for me.

The above assumes E32/34 gear box and you have tyres that maintain stock rolling radius

thanks andy

i take it, its no good then

Post Mon Sep 25, 2006 11:43 pm

If you have a little bit of time to shop around give it a miss

Post Mon Sep 25, 2006 11:46 pm

ok thanks andy, im currently trying to source a 3.64 or 3.46