I know it sounds stupid but, 2 morrow i will be fitting a AC schnitzer rear apron, and it screws just under the bumper!
just wanna know how to remove the rear bumper, and how easy it is!
I can assume that its a piece of piss, but dont wanna do it, get the hump, and start throwing things!!!
any help please!!!!
thanks
e30 bemer
Removal of rear bumper
Moderator: martauto
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49359
- Joined: Mon Jan 10, 2005 11:00 pm
Assuming your's is post facelift car, then unscrew two large bolts under the bumper going straight upwards,( either female hex or torx headed ), and pull the bumper straight backwards. (side pieces of bumper slide into two guides just behind the wheelarches).
-
e30bemer
- Nutters

- Posts: 1399
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Waltham Cross, Enfield
mine is the post face lifted model! will look 2 morrow
mant thanks
mate
e30 bemer
mant thanks
mate
e30 bemer
-
Treeman612
- E30 Zone Newbie

- Posts: 238
- Joined: Thu Jan 20, 2005 11:00 pm
- Location: Newbury, Berks
hi, one word of advice, having done it myself - if you have access to another pair of hands, i.e. a mate (?) it will make the swop a lot easier - you have to hold the bumper in position horizontally, to get the holes for the 2 big torx bolts 2 line up, plus you have to feed the front of the bumper 'wings' in to slots on a bit of metal bolted to the rear wings (both sides at the same time!!). It's a b**ger on yer own!
HTH
Jon
HTH
Jon
