How do i get out the rockershafts of a M20 head ?
I have the rockers free on the shafts and the cam is free. Do the rockershafts just slide out ?
Quick camshaft/rockershafts question
Moderator: martauto
-
kam-325i
- E30 Zone Team Member
- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
-
Ant
- Retired Team Member
- Posts: 10496
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: PD+E dept :D
http://www.e30zone.net/modules.php?name ... lhead1.htm
All related info is contained in that link Kam, they can need a tap with a hammer and drift to get them moving, but yup, they slide right out.
All related info is contained in that link Kam, they can need a tap with a hammer and drift to get them moving, but yup, they slide right out.
Product Development and Endurance for Delphi.
Original performance chips, original works not unlicensed copies
Email FTW
Original performance chips, original works not unlicensed copies
Email FTW-
Martinaston
- E30 Zone Addict
- Posts: 3749
- Joined: Mon Mar 14, 2005 11:00 pm
- Location: London
After you pull out the key at the front, or you'll be bangin away all day 
There is NO nucleus.
-
kam-325i
- E30 Zone Team Member
- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
well that now looks easy !!!
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
-
kam-325i
- E30 Zone Team Member
- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
The grub screws that are in the ends of the rockershafts, are they supposed to be the same for both shafts ?
The screws in the intake shaft are different to the ones in the exhaust shaft. (size and thread pitch)
The screws in the intake shaft are different to the ones in the exhaust shaft. (size and thread pitch)
Pete don't care about colour, He would shag a rainbow if he could find the end of it....