I know im going to have to get an original part, but id like go to the dealer armed with as much info as possible.
Mine is nearly corroded through. If it snaps I am at risk of causing a crack in the downpipe which could be seriously costly.
318is Exhaust Downpipe Support Bracket/Mount
Moderator: martauto
-
jamesjohn318is
- E30 Zone Newbie
- Posts: 50
- Joined: Tue Mar 22, 2005 11:00 pm
Has anyone got a link to a diagram website that shows the part numbers for the downpip support hanger/bracket? It is the part that fixes to the base of the gearbox and has two rubber supports.
I know im going to have to get an original part, but id like go to the dealer armed with as much info as possible.
Mine is nearly corroded through. If it snaps I am at risk of causing a crack in the downpipe which could be seriously costly.
I know im going to have to get an original part, but id like go to the dealer armed with as much info as possible.
Mine is nearly corroded through. If it snaps I am at risk of causing a crack in the downpipe which could be seriously costly.
-
E30Mark
- E30 Zone Team Member
- Posts: 8107
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Wimborne, Dorset
Hope this helps!
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
PM for details
-
Demlotcrew
- E30 Zone Team Member
- Posts: 13329
- Joined: Mon Dec 20, 2004 11:00 pm
- Location: East Anglia
There are two types of supports.
Andrew
Andrew
-
jamesjohn318is
- E30 Zone Newbie
- Posts: 50
- Joined: Tue Mar 22, 2005 11:00 pm
Fantastic, cheers Mark.