Wish me luck!

Thu Sep 14, 2006 2:55 pm

My track slag has her MOT in about half hour, should just scrape through suppse it depends on the mood of the tester

with it's dodgy plate and only 3 lights lol

I'll let you know how bad it is

Thu Sep 14, 2006 5:08 pm

Failed as expected but it wasn't no bad

little bit of welding new light and a tyre.

Still cant drive her though

Thu Sep 14, 2006 6:18 pm

I will assume it's an MOT fail to not have a main beam?

Thu Sep 14, 2006 6:21 pm

You could do a light conversion to two singal head lights with sides, dip, main like the mkll Golfs?

Thu Sep 14, 2006 6:24 pm

Also, i presume you took the head light out for air flow? if you did one of the motor factors motor world/save do a port for a sub box that fits perfectaly into the plastic front grill an as its a trumpet shape it would channel the air better and would look pritty cool too

.

Thu Sep 14, 2006 11:59 pm

Might have to have a look at that, i did think about a one from a sub but couldn't find one the right size,

As for a conversion would golf lamps fit? I've got a few knocking about!

Fri Sep 15, 2006 2:50 pm

Remove the headlight unit from the other side - under build and use regs, if they are fitted, then they must work - and since they won't be fitted, they won't be needing to test them ;) - this applies to anycar

same story for hazard warning lights on all cars registered before 1974 - if they are fitted, they must work