electric windows in rear...
Moderator: martauto
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
which parts would i need to fit electric windows to the rear of my touring? is there a kit available? i already have electric windows in the front so should i assume theres wiring there already?thanks.
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
mine has rear electric windows. i suspect it's just a case of hunting on ebay / scrapyards / wanted ads on here. rare though 
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
have they been added or was it an optional extra from new? i was thinking of trying to fit a front kit from the scrappy 
-
StuBeeDoo
- Engaged to the E30 Zone

- Posts: 6756
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: Up My Own Arse
The console is marked for the switches.
I didn't think about the rear cut-off switch when I bought the parts, so I just linked the two wires together. A don't have children and am not likely to, so it's not an issue. In the unlikely event that I ever sell the car, I'll fit a switch first.
I didn't think about the rear cut-off switch when I bought the parts, so I just linked the two wires together. A don't have children and am not likely to, so it's not an issue. In the unlikely event that I ever sell the car, I'll fit a switch first.
Last edited by StuBeeDoo on Sun Sep 17, 2006 7:45 am, edited 2 times in total.
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
mine were factory fitted, along with my LSD and sport touring interior with dog guard!
expensive when new for a 1990 325i
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
SPADGE
- Married to the E30 Zone

- Posts: 7373
- Joined: Wed Aug 09, 2006 11:00 pm
- Location: Milton Keynes, Bucks
As has been said all the wiring is there already its a simple plug and play job!
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
If the wiring is there in my council spec 318i then im sure yours will have it 
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
If a four door car has OE electric fronts, then it will have the connectors for the rear switches under the marked out positions for the switches on the console.
The wiring may end at a socket half way up the rear door hinge pillars, or, in about half of all cars, in my experience, a plug will be there as well, and the loom into the doors will be fitted.
To add rear electric windows you will need: four switches, the rear switch isolator switch for the rear windows, the complete rear motor assemblies ( nothing like the fronts), doorcards (or something to block the manual winder hole), and possibly, the door looms.
The wiring may end at a socket half way up the rear door hinge pillars, or, in about half of all cars, in my experience, a plug will be there as well, and the loom into the doors will be fitted.
To add rear electric windows you will need: four switches, the rear switch isolator switch for the rear windows, the complete rear motor assemblies ( nothing like the fronts), doorcards (or something to block the manual winder hole), and possibly, the door looms.
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
the rear doorcards on mine have plastic caps to cover where the winders would go. i'm pretty sure they're standard as i bought some more from bmw (only about Ԛ£1 i think) when the kids managed to pull mine out and lose them! 
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
The plastic caps are for dealer fit conversions. Factory fitted rear electric windows are covered by door cards with no winder hole in them.
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
arses!!!!!
the search for matching rear doorcards will start immediately!
the search for matching rear doorcards will start immediately!
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Alternative that "looks like it belongs there" on front doorcards, is to fit angled tweeter pods over the holes (wiring is already in the doors on the fronts). Not sure if it would look right in the back though, and you'd have to add the wiring.
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
and the kids would rip those off too! 
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Fit a small metal stud to each one and connect the studs by a piece of wire to a plug lead.gareth wrote:and the kids would rip those off too!
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Prevention being better than cureBrianmoooore wrote:Fit a small metal stud to each one and connect the studs by a piece of wire to a plug lead.gareth wrote:and the kids would rip those off too!
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
harsh!!!!
i take it you have kids too brian?
i take it you have kids too brian?
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Three of 'em. They've comprehensively wrecked the touring rear seats!gareth wrote: i take it you have kids too brian?
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
i have now imposed a total food ban in my car. if the dids want to eat or drink, we stop and they get out!!!!
i hate sticky streaky fingerprints in the rear windows!!!!!!
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
daimlerman
- **BANNED**
- Posts: 15968
- Joined: Mon Feb 27, 2006 11:00 pm
- Location: Grumpy Old Man
Try seatbelts and hand cuffs.....
-
StuBeeDoo
- Engaged to the E30 Zone

- Posts: 6756
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: Up My Own Arse
-
StuBeeDoo
- Engaged to the E30 Zone

- Posts: 6756
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: Up My Own Arse
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
i wont bother with that then.is there a specific kit available for this or is it a case of trying to track down all the bits myself?essbee wrote:Rears are totally different.fuzzy wrote:i was thinking of trying to fit a front kit from the scrappy
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Keep your eyes open for them in the scrapyards. They're not that common, but I come across a set occassionaly.
Very easy to fit, once you get the card off.
Very easy to fit, once you get the card off.
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
me and my mate converted a pair of manual winder touring doors to electric, replaced the glass and fitted them all up on my car today to replace 2 damaged doors. took us 4-5 hours all in. at that rate, a pair of touring rear doors could be converted in 3 - 4 hours i reckon.
getting the wiring in place before doing the window swap makes things a lot easier as you cant wind the motors up and down without power
getting the wiring in place before doing the window swap makes things a lot easier as you cant wind the motors up and down without power
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
StuBeeDoo
- Engaged to the E30 Zone

- Posts: 6756
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: Up My Own Arse

