Hi need some urgent help, Ok im building the bottom half of an engine 2.7, what would the Torque Settings be on the conn rods? and are they the same e.g.
320i, 323i, 325i, 525e??? are all the M20 blocks be the same torque settings? this engine is a 2.7 as stated..
any help will be gratefull..
Thanks In Advance
Jimi
325/525e Torque Settings
Moderator: martauto
-
--alpina--
- E30 Zone Regular
- Posts: 787
- Joined: Fri Aug 04, 2006 11:00 pm
- Location: somewhere in timbuktu
-
Ant
- Retired Team Member
- Posts: 10496
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: PD+E dept :D
samey same dude
unless you're uprating the bolts ??
ARP etc spec their own settings iirc.
unless you're uprating the bolts ??
ARP etc spec their own settings iirc.
Product Development and Endurance for Delphi.
Original performance chips, original works not unlicensed copies
Email FTW
Original performance chips, original works not unlicensed copies
Email FTW-
--alpina--
- E30 Zone Regular
- Posts: 787
- Joined: Fri Aug 04, 2006 11:00 pm
- Location: somewhere in timbuktu
Ant thanks for your reply. ok if you know what the torque settings for the conrod bolts are i`d appreciate it as the con rod bolts are standard BMW..
Cheers..
Jimi.
P.s. Soon i will need to remap my ECU for my freshly built again 2.7 with pre 1985 eta pistons, it has an alpina C2 2.7 chip, but i think it needs a professional remapper to get the power band right, if u know of anybody and prices please, ill be very gratefull.
Cheers..
Jimi.
P.s. Soon i will need to remap my ECU for my freshly built again 2.7 with pre 1985 eta pistons, it has an alpina C2 2.7 chip, but i think it needs a professional remapper to get the power band right, if u know of anybody and prices please, ill be very gratefull.