This might be silly question, but is it possible to upgrade my suspension with M3 shocks and springs?
Cheers
eddie 3201
Upgrading suspension on my 320i
Moderator: martauto
-
Silverfang
- E30 Zone Regular
- Posts: 937
- Joined: Fri Dec 23, 2005 11:00 pm
- Location: Northampton
Not as far as i know!
I'm looking at a H&R spring setup with either Bilstein or H&R's shocks, with M3 ecentric top mounts and uprated antiroll bars from the E30 zone shop. Though with the H&R shocks you do need to swap the front clamps on the hubs for 325i ones since the 320i shocks are smaller diameter.
Heard that setup is pretty damned good for handling
I'm looking at a H&R spring setup with either Bilstein or H&R's shocks, with M3 ecentric top mounts and uprated antiroll bars from the E30 zone shop. Though with the H&R shocks you do need to swap the front clamps on the hubs for 325i ones since the 320i shocks are smaller diameter.
Heard that setup is pretty damned good for handling
BMW and Opel, both RWD, both german, both good fun
http://www.clockservicing.co.uk/ For any clock repairs try here.
http://www.clockservicing.co.uk/ For any clock repairs try here.