offset e30 m3

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
tobias
E30 Zone Regular
E30 Zone Regular
Posts: 326
Joined: Tue Aug 29, 2006 11:00 pm
Location: isle of man

Post Fri Sep 08, 2006 9:32 pm

hi guys does anyone know what size ofset is best for the e30 m3?????
regards toby
maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Fri Sep 08, 2006 9:34 pm

15 for the fron and 22 for the rear i think
Image
User avatar
tobias
E30 Zone Regular
E30 Zone Regular
Posts: 326
Joined: Tue Aug 29, 2006 11:00 pm
Location: isle of man

Post Fri Sep 08, 2006 9:44 pm

would i have any issues with 8x17s??

rgds toby
maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Fri Sep 08, 2006 9:45 pm

ofset?
Image
Cabrio
E30 Zone Camper
E30 Zone Camper
Posts: 1031
Joined: Wed Aug 03, 2005 11:00 pm

Post Fri Sep 08, 2006 9:48 pm

what width wheels, what size tyres...and do you want to roll the arches or not
What springs and struts are you using...when you go off the standard you need to consider the whole setup

Sorry but not an easy answer for this one without the facts
User avatar
tobias
E30 Zone Regular
E30 Zone Regular
Posts: 326
Joined: Tue Aug 29, 2006 11:00 pm
Location: isle of man

Post Fri Sep 08, 2006 9:59 pm

sits low on bilsteins, dont wanna roll arches, 8x17 no tyres on yet but guess will have to be low profile. its on 17s at the mo but they look terrible...... tie sooner they are off the better
Cabrio
E30 Zone Camper
E30 Zone Camper
Posts: 1031
Joined: Wed Aug 03, 2005 11:00 pm

Post Fri Sep 08, 2006 10:43 pm

Even with 40 profile likely you will catch the centre of the arches..especially if lower than 30mm

Eibach do the best 30mm spring..but may need to use 35 profile tyre

What offset are the wheels you have and what car were they off...offset ideally will need to be between 20 and 25 to start with but will be trial and error.. as will differ when have people in back seat or under load when cornering etc