cab roof
Moderator: martauto
-
tommy22
- E30 Zone Newbie

- Posts: 204
- Joined: Sat Dec 24, 2005 11:00 pm
- Location: ipswich
will a manual roof fit a car with electric roof is it hard to do
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
yes...ish - the hoods are slightly different, and so are the frames I believe
but you don't mean that, do you - do you mean
can I convert an electric roof to manual?
yes, but you need about Ԛ£100 of kit from BMW if you don't have a donor car
use the 'search' at the top for a detailed post where someone has actually done it
but you don't mean that, do you - do you mean
can I convert an electric roof to manual?
yes, but you need about Ԛ£100 of kit from BMW if you don't have a donor car
use the 'search' at the top for a detailed post where someone has actually done it
-
BLACK325I
- E30 Zone Newbie

- Posts: 121
- Joined: Fri Apr 07, 2006 11:00 pm
- Location: birmingham
you have a pm

-
tommy22
- E30 Zone Newbie

- Posts: 204
- Joined: Sat Dec 24, 2005 11:00 pm
- Location: ipswich
not selling electric one i have been offered a second hand manual roof i didnt know if i could take the cover off the manual and put it on a electric
-
orangecurry
- E30 Zone Addict

- Posts: 2518
- Joined: Mon Apr 11, 2005 11:00 pm
- Location: West Sussex
I believe there is an extra bit of material on the electric one; stitched on the inside - something to do with the mechanism/rods?
have a look at your existing electric hood and see - can you easily compare the manual one before you buy?
have a look at your existing electric hood and see - can you easily compare the manual one before you buy?
-
tommy22
- E30 Zone Newbie

- Posts: 204
- Joined: Sat Dec 24, 2005 11:00 pm
- Location: ipswich
ok thanks
-
DaveD
- E30Zone Wiki Specialist
- Posts: 5129
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Sheffield
there is a little narrow piece of material over the drivers head that a long narrow rod goes through ...this keeps the tensioners and the roof material together when closing the electric hood.otherwise it tends to drop and not go under the flap properly
