any remedys? the handle moves but the damn thing just wont open. its got a tom tom and ipod in there too..
dont wwant to force it with a screwdriver until ive checked with you guys.
Dan
glovebox is stuck shut!!
Moderator: martauto
-
FBF
- E30 Zone Regular

- Posts: 487
- Joined: Sun Aug 27, 2006 11:00 pm
- Location: gatwick

im so sexy justin brought me back 5 times
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
Jerran
- E30 Zone Newbie

- Posts: 145
- Joined: Mon Jan 10, 2005 11:00 pm
Or you can butcher it and I'll send you a replacement glove box ?
-
baur320
- E30 Zone Squatter

- Posts: 1507
- Joined: Wed Jan 12, 2005 11:00 pm
- Location: Tyneside
This happened to mine at Donington last year - with all the cameras inside.
Couldn't get the screwdriver between the dash and the lip on the glovebox without causing damage, so took out the three screws Chris mentioned, pushed the glove box up a little at the back and the gap then becomes big enough at the front to get the screws out of the latch. Ended up with slight dents on the bottom of the dash, but they eventually disappeared.
Couldn't get the screwdriver between the dash and the lip on the glovebox without causing damage, so took out the three screws Chris mentioned, pushed the glove box up a little at the back and the gap then becomes big enough at the front to get the screws out of the latch. Ended up with slight dents on the bottom of the dash, but they eventually disappeared.
-
FBF
- E30 Zone Regular

- Posts: 487
- Joined: Sun Aug 27, 2006 11:00 pm
- Location: gatwick
great thanks for the advice guys. jerran i will be in touch if i need to...
this is such a good forum i could $hit.
this is such a good forum i could $hit.

im so sexy justin brought me back 5 times
-
SGP
- E30 Zone Regular

- Posts: 502
- Joined: Thu Aug 31, 2006 11:00 pm
The hadle on these boxes is prone to breaking, its made of plastic if you butcher the handle you can get in and replacement handles are still available from bmw.Alternatively get a second hand one,keep the barrell from the original (assuming it's lockable)and it can be installed on your replacemant part with the aid of a circlip pliers!
If it ain't broke..
Fix it till it is
Fix it till it is

