Could anyone with a 318iS do me a favour please?
I now have two 318iS-es. The lower front panel below the front bumper on one is smooth but on the other it's rough and textured.
I think the smooth one looks better but before I go hunting for a replacement front panel for the second could anyone please have a look at their car and let me know if the smooth one was standard, or was it the rough one?
Thanks
John
Anyone with a 318iS
Moderator: martauto
-
E30Mark
- E30 Zone Team Member

- Posts: 8107
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Wimborne, Dorset
The panel should have a textured finished, anti stone chippie! the smooth panel will get chipped to death...
1 & 2 bed flats in Bournemouth areas, with parking
PM for details
PM for details
-
Chris-W
- E30 Zone Team Member

- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
JohnH
- E30 Zone Newbie

- Posts: 162
- Joined: Sat Mar 05, 2005 11:00 pm
- Location: Ireland
Thanks lads for the help - and the prompt responses, much appreciated.
John
John
-
kevin316i
- E30 Zone Regular

- Posts: 783
- Joined: Mon Jan 10, 2005 11:00 pm
Original should have a textured finish John. Smooth one was probably a respray. However, you will hardly notice the difference. The main thing is the condition of the front valence on the inside, they can be prone to rust and getting a good used one is nearly impossible. The smooth one may have received some stonechip paint that was applied with a normal spray gun rather than a schutz gun.


