tech kit
Moderator: martauto
-
midnight
- E30 Zone Regular

- Posts: 328
- Joined: Tue Aug 15, 2006 11:00 pm
- Location: NW London
-
Ziggy
- E30 Zone Team Member

- Posts: 11534
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: floating round my tin can...
Just have a look in the photo gallery section... it's pretty obvious! 
E30 in need of wiring loom smoke since April '11...
-
Theo
- Old Skooler

- Posts: 10735
- Joined: Wed Jun 01, 2005 11:00 pm
- Location: Kent
Right basically, tech 1 kit fits a metal bumper car, whereas the tech 2 kit will fit the later plastic bumper version.
Tech1 kit consists of 1 piece front spoiler, 1 piece side skits, 1 piece rear apron, and a 2 piece boot spoiler. The kit also requires replacement bumper endcaps and rubber bump strips for the back, and different bumper trim for the front (although you can use the standard items up front). There are various other specific parts which come in a 'complete' kit such as tow eye extensions but the basics necessities are covered above.
The Tech 2 kit consists of a one piece rear apron, a specific front bumper, with separate lower spoiler. It also has much more complicated sideskirts, which consist of skirts which attach the the sill, with three (four if a 4dr) pods which are attached to the side of the car (on each side), above the sill skirts. Tech 2 kit also has a boot spoiler, which in my opinion, looks shit.
Hope this helps
Theo
Tech1 kit consists of 1 piece front spoiler, 1 piece side skits, 1 piece rear apron, and a 2 piece boot spoiler. The kit also requires replacement bumper endcaps and rubber bump strips for the back, and different bumper trim for the front (although you can use the standard items up front). There are various other specific parts which come in a 'complete' kit such as tow eye extensions but the basics necessities are covered above.
The Tech 2 kit consists of a one piece rear apron, a specific front bumper, with separate lower spoiler. It also has much more complicated sideskirts, which consist of skirts which attach the the sill, with three (four if a 4dr) pods which are attached to the side of the car (on each side), above the sill skirts. Tech 2 kit also has a boot spoiler, which in my opinion, looks shit.
Hope this helps
Theo
Last edited by Theo on Wed Aug 30, 2006 12:28 am, edited 1 time in total.
-
NH325CAB
- E30 Zone Regular

- Posts: 346
- Joined: Sun Feb 05, 2006 11:00 pm
- Location: Southampton, Hampshire, UK
Tech 2 kit also has a boot spoiler, which in my opinion, looks shit.
He he, spot the tech 1 driver!

-
Ziggy
- E30 Zone Team Member

- Posts: 11534
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: floating round my tin can...
Meh, he's right though. & it's not opinion; I agree with it so it's fact. 
Tech-1 or a colour coded lip look good on the right car, but no spoiler's usually the way forward!
Tech-1 or a colour coded lip look good on the right car, but no spoiler's usually the way forward!
E30 in need of wiring loom smoke since April '11...
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
Yeah my tech 1 cabby will have no spoiler soon and also some tech 1 side skirts in the winter 

Considering Selling the Cabby, looks like its gonna go
-
Ziggy
- E30 Zone Team Member

- Posts: 11534
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: floating round my tin can...
I'm shocked - seeing as I've done both of those things to my car, I'd never have expected you to do the same... 
(actually, they're zender skirts that I've just fitted, but the point remains!
)
(actually, they're zender skirts that I've just fitted, but the point remains!
E30 in need of wiring loom smoke since April '11...
-
eko
- Old timer
- Posts: 11531
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: South Devon
Ziggy what rear skirt is your car wearing,Tec1 or Zender?
Sorry for the O/T
Sorry for the O/T

-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
wicked mate, how much work was involed in doing ur skirts??Ziggy wrote:I'm shocked - seeing as I've done both of those things to my car, I'd never have expected you to do the same...
(actually, they're zender skirts that I've just fitted, but the point remains!)

Considering Selling the Cabby, looks like its gonna go
-
TheRealest
- E30 Zone Regular

- Posts: 261
- Joined: Wed Jan 18, 2006 11:00 pm
- Location: Enfield
i found sum 1 that did a straight swap for his tech 1 boot spoiler for my tech 2 spoiler - wot a geezer!!!

-
316vinni
- E30 Zone Newbie

- Posts: 100
- Joined: Sat Aug 19, 2006 11:00 pm
If its the rear one on the red one in his sig, then its zender Ekoeko wrote:Ziggy what rear skirt is your car wearing,Tec1 or Zender?
Sorry for the O/T
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
yeah the rear valnce is a zender in ziggys sig

Considering Selling the Cabby, looks like its gonna go
-
Ziggy
- E30 Zone Team Member

- Posts: 11534
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: floating round my tin can...
Zender mate, along with the Zender skirts... I've got the front in the garage, but I've not decided whether to fit it yet. I'll get some better pics up when I get the splitties on!eko wrote:Ziggy what rear skirt is your car wearing,Tec1 or Zender?
Sorry for the O/T

I love the zender stuff, but I can see why you'd want all your kit to be the same on your motah... gonna be v.cool btw!
E30 in need of wiring loom smoke since April '11...
-
TheRealest
- E30 Zone Regular

- Posts: 261
- Joined: Wed Jan 18, 2006 11:00 pm
- Location: Enfield
cliffybabe wrote:Yeah my tech 1 cabby will have no spoiler soon and also some tech 1 side skirts in the winter
where u gettin sideskirts from???
-
eko
- Old timer
- Posts: 11531
- Joined: Sat Feb 05, 2005 11:00 pm
- Location: South Devon
Ah thought it was Zender,was going to try and palm you off with mineI love the zender stuff, but I can see why you'd want all your kit to be the same on your motah... gonna be v.cool btw!

-
Ziggy
- E30 Zone Team Member

- Posts: 11534
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: floating round my tin can...
$hitloads tbh. The profile where they come up at the ends (just like tech-1 skirts) was all wrong for a cab. Decided they'd never look right, so I lopped those bits off - sounds simple, but it took a while!cliffybabe wrote: wicked mate, how much work was involed in doing ur skirts??
E30 in need of wiring loom smoke since April '11...
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
gonna make them from the tech 1 skirts off a coupe i have a set of fibre glass ones for mock upsTheRealest wrote:cliffybabe wrote:Yeah my tech 1 cabby will have no spoiler soon and also some tech 1 side skirts in the winter
where u gettin sideskirts from???

Considering Selling the Cabby, looks like its gonna go
-
TheRealest
- E30 Zone Regular

- Posts: 261
- Joined: Wed Jan 18, 2006 11:00 pm
- Location: Enfield
let me know how u get on! i'm gettin sick of waitin 4 an original pair to turn up!

-
midnight
- E30 Zone Regular

- Posts: 328
- Joined: Tue Aug 15, 2006 11:00 pm
- Location: NW London

