I'm fitting a Cat 2 immobiliser to my car and need to know the wire colours at/around the glovebox for the following,
- Ignition live (that stays live with engine running+when cranking)
- The wire that goes to the starter solenoid so that i can loop the immobiliser in
- The wire that feeds the fuel pump or ignition, for the same reason
- Drivers door contact wire
Anyone who has access to, or could post a link to a wiring diagram, your help would be much appreciated.
The car is a 1990 318is if it makes any difference.
Wire colour question
Moderator: martauto
-
tim_s
- E30 Zone Squatter
- Posts: 1661
- Joined: Thu Feb 03, 2005 11:00 pm
- Location: Bristol/London
James, will pm you how i did mine, not too fond of posting it up on here as then everyone wil know how to get around my immobiliser!
2.1 318is, MS, LPG. 200bhp, 175ft/lbs GONE!
Boxster, e46 m3, e36 sport touring and alpina B3 3.0
-
Jamesb318is
- E30 Zone Regular
- Posts: 620
- Joined: Wed Jan 12, 2005 11:00 pm
- Location: East Sussex
nice one mate
