offset woes, spacers?

[CraigG]

17inch wheels, with 205tyres and an offset of 40....

im guessing i need ~15mm spacers, i dont really want to run spacers, but im going to have to if i want these wheels, is there anywhere i can get decent spacers with the center bore extentions on them?

also you reckon these wheels, spaced correctly, will work with a HnR 60/40 kit? 'work' as in not rub like a mother******

cheers
craig

[Kos]

you'd get away with using 10mm spacers

try deemon tweeks

[StuBeeDoo]

Depends on the rim width. You haven't said what it is.

[CraigG]

i aint said the wheel width because i donot know it im assuming at worst its 7.5j.

wheels are lenzo Evo2's topgear website doesnt list the width, only tyre size

[CraigG]

dumb question here, ive not had the wheels of me beemer yet, at the wheel bolts, or wheel studs/nuts?

[StuBeeDoo]

dumb question here, ive not had the wheels of me beemer yet, at the wheel bolts, or wheel studs/nuts?

Bolts.
Ideally you need 24mm offest for 7" rims, 18mm for 7.5" and 13mm for 8".
HTH
Stuart.

[StuBeeDoo]

Assuming you're still running 4-bolt hubs Gareth, I'd go for 8" et 13.
Stuart.