Does any one have a wiring diagram for the ignition to starter motor for a 1989 325i?
Thanks
Alison
Wiring Diagram
Moderator: martauto
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49359
- Joined: Mon Jan 10, 2005 11:00 pm
Black/yellow wire from the ignition switch to the starter motor solenoid.
Goes through a plug and socket near the ignition switch, across car behind dash, through a single connector above the glovebox, (where starter inhibit relay for an auto connects in), through multipin connector behind glovebox, up through the fusebox housing to the big round C101 connector on the bulkhead near the fusebox, and then through the engine loom to the starter motor.
There is also a branch to the diagnostic socket for remote start.
Goes through a plug and socket near the ignition switch, across car behind dash, through a single connector above the glovebox, (where starter inhibit relay for an auto connects in), through multipin connector behind glovebox, up through the fusebox housing to the big round C101 connector on the bulkhead near the fusebox, and then through the engine loom to the starter motor.
There is also a branch to the diagnostic socket for remote start.