i think i have all the bits for the electric sunroof conversion, could anyone list me all the bits required?
is it basically bolt one, strap up the wiring loom and attach to befind the glove box and sorted?
electric sunroof conversion,
Moderator: martauto
-
smithy318i
- Engaged to the E30 Zone

- Posts: 5797
- Joined: Thu Apr 28, 2005 11:00 pm
- Location: Tyne & Wear
motor
mounting plate
relay
wires
switch
mounting plate
relay
wires
switch

-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
You'll save a lot of problems if you get the motor with the full mounting plate and all the guide tubes still attached.
Wind the old guide tubes off the flexible operating wires, and feed them into the new ones.
Wind the old guide tubes off the flexible operating wires, and feed them into the new ones.
-
tomson
- E30 Zone Addict

- Posts: 3598
- Joined: Sun Nov 06, 2005 11:00 pm
- Location: Bristol
Front head lining panel is different also on saloons, on a touring its the whole headlining!
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
But a saloon panel will fit.tomson wrote:on a touring its the whole headlining!
-
tomson
- E30 Zone Addict

- Posts: 3598
- Joined: Sun Nov 06, 2005 11:00 pm
- Location: Bristol
how do you mean Brian?Brianmoooore wrote:But a saloon panel will fit.tomson wrote:on a touring its the whole headlining!
-
A1BMW325iSport
- E30 Zone Addict

- Posts: 4239
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Mid Wales
as brian said replace the complete mounting plate with guides, i did that on mine, and cleaned and regreased the cables on re-fitment
-
dark_sounds
- E30 Zone Addict

- Posts: 2458
- Joined: Thu Dec 01, 2005 11:00 pm
hmm will check to see if i have the mounting plate.
-
eamo
- E30 Zone Regular

- Posts: 465
- Joined: Tue Feb 22, 2005 11:00 pm
- Location: Offaly, Ireland
what are the guide tubes??
-
A1BMW325iSport
- E30 Zone Addict

- Posts: 4239
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Mid Wales
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
Ali if u need one mate me and the boys r going to pea's on Sat morning if theres anything u needdark_sounds wrote:hmm will check to see if i have the mounting plate.

Considering Selling the Cabby, looks like its gonna go
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
You can cut away the front of the touring headlining with the hole for the manual winder and then cover up the damage with the front panel from a saloon and a bit of the foam plastic around the front of the sunroof apeture.tomson wrote:how do you mean Brian?Brianmoooore wrote:But a saloon panel will fit.tomson wrote:on a touring its the whole headlining!
-
dark_sounds
- E30 Zone Addict

- Posts: 2458
- Joined: Thu Dec 01, 2005 11:00 pm
oo ek! ill have a list for you then sonny!cliffybabe wrote:Ali if u need one mate me and the boys r going to pea's on Sat morning if theres anything u needdark_sounds wrote:hmm will check to see if i have the mounting plate.


