Touring Back Seat
Moderator: martauto
-
KDS
- E30 Zone Newbie
- Posts: 194
- Joined: Thu Jan 20, 2005 11:00 pm
- Location: Vancouver, Canada
I'm taking apart the left rear seat back in my Touring so I can replace the latch mechanism (the black plastic loop that pops up next to the head rest). I've got the seat padding off, but I'll be damned if I can figure out how to remove the carpeted panel attached to the BACK of the seat back. Thoughts?
-KDS in Vancouver ('88 325i Touring)
-
Theo
- Old Skooler
- Posts: 10735
- Joined: Wed Jun 01, 2005 11:00 pm
- Location: Kent
Slide it downwards! HTH
-
oze30
- E30 Zone Addict
- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
just watch your fingers!!!
Don't lose the little spring retaining washer. It's a bit fiddly and it flies off when you pry it off!
Don't lose the little spring retaining washer. It's a bit fiddly and it flies off when you pry it off!
-
KDS
- E30 Zone Newbie
- Posts: 194
- Joined: Thu Jan 20, 2005 11:00 pm
- Location: Vancouver, Canada
Thanks guys. I keep reading about this spring clip, but can't seem to find it. When the seat back is flipped forward, does it live somewhere down inside the black metal channel where everything hinges? The most that I can see down there is a little metal strip--about 1/4 inch by 2 inches that looks like it's tack welded to the channel. I've gotta be missing something obvious...
-KDS in Vancouver ('88 325i Touring)