Snaped a rocker! Has this happend to anybody else?

Need technical Q/A then you're in the right place

Moderator: martauto

Post Reply
beadle
E30 Zone Newbie
E30 Zone Newbie
Posts: 37
Joined: Mon Jun 19, 2006 11:00 pm
Location: Brighton

Thu Jul 20, 2006 9:04 pm

Driving down the road and -BANG! Then got a clunking sound and no power!
So i take it 2 my mechanic mate , He takes the rocker cover off and sees the snaped rocker! So we get a new rocker, take the rod out the front of the car ,with the fan and the rad and replace it! Then put it back together??? But Car is F**ked ,Ive got no power and the idle is up and down!

Well pissed off!!!!!!! :-x

Anyone had this happen? Or no what 2 do????? :(


It goes like a metro!!! :cry:
User avatar
Steviec
E30 Zone Camper
E30 Zone Camper
Posts: 1489
Joined: Sun Oct 09, 2005 11:00 pm
Location: Loughton, Essex

Thu Jul 20, 2006 9:34 pm

Sounds like you need a better mechanic! (joke!)

Ive snapped a rocker before but I also replaced the rocker shaft and end caps while it was out. I didnt have any problems after though.
Has everything been put together properly and no wires knocked loose?
Might be worth checking the cable and plug on the AFM and also check all the plugs leads and distributor cap, make sure nothings loose. Also were the leads put back in the right order? Just checking.

Oh, what engine is it?
Andy325i
E30 Zone Addict
E30 Zone Addict
Posts: 4052
Joined: Mon Jan 10, 2005 11:00 pm
Location: Avon
Contact:

Thu Jul 20, 2006 9:41 pm

as above, also valve clearences or bent valve?

Andy
Image
M50B25NonVanos & M52B28Vanos Heads for sale. Pm Me.
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Thu Jul 20, 2006 9:46 pm

rockers can break on cars with valve clearances too tight which are driven hard.

It's a head off job aswell so i'm told. They do wear so i would think replacing them all could be a benefit. I think they are £10 each though!

U can get the cam out without taking the head off but it's a bonnet off job and undoing the engine mounts and jacking it up

hth
oh and don't drive it!!!
Jerran
E30 Zone Newbie
E30 Zone Newbie
Posts: 145
Joined: Mon Jan 10, 2005 11:00 pm
Contact:

Thu Jul 20, 2006 9:51 pm

Happened to me a few years ago in my M Tech 1 Sport, was having fun in it one day, pulled up to a set of lights and noticed it was running on 5. I think number one had snapped. Engine still ran though obviously didn't sound right running on 5. Head came off, replaced more than just the broken one and had change from £200. Car was fine after that.
beadle
E30 Zone Newbie
E30 Zone Newbie
Posts: 37
Joined: Mon Jun 19, 2006 11:00 pm
Location: Brighton

Thu Jul 20, 2006 9:56 pm

Nice one for all the replyz! And its a 320i by the way, The engine was rebuilt at christmas!! :cry: The head was not!!!!!! Taken off :cry: F**k it new rebuild-or 325 in it.............
beadle
E30 Zone Newbie
E30 Zone Newbie
Posts: 37
Joined: Mon Jun 19, 2006 11:00 pm
Location: Brighton

Thu Jul 20, 2006 9:58 pm

Jerran wrote:Happened to me a few years ago in my M Tech 1 Sport, was having fun in it one day, pulled up to a set of lights and noticed it was running on 5. I think number one had snapped. Engine still ran though obviously didn't sound right running on 5. Head came off, replaced more than just the broken one and had change from £200. Car was fine after that.
Change from £200? Yeah? Shit my so called mate wanted£150 for just changeing the rocker????.......... :-x
e21Jason
E30 Zone Addict
E30 Zone Addict
Posts: 2040
Joined: Tue Jan 11, 2005 11:00 pm
Location: Dubai, UAE

Thu Jul 20, 2006 10:12 pm

Hi

As part of my 3.0l I got some billet steel rockers made up as I have heard the were a weak stop around 7k, micro polished for more power.

Jason
Turbo-Brown
Boost Junkie
Posts: 4705
Joined: Tue Feb 15, 2005 11:00 pm
Location: Aldershot, Hants
Contact:

Thu Jul 20, 2006 10:14 pm

Would imagine Jerran did the work himself for that price TBH.

It's a pretty labour intesive job, especially with the engine in the car!
325i Twin Turbo (until 10am 01/12/07 :( )

www.air-in.co.uk free M20 exhaust and inlet flange
User avatar
Steviec
E30 Zone Camper
E30 Zone Camper
Posts: 1489
Joined: Sun Oct 09, 2005 11:00 pm
Location: Loughton, Essex

Thu Jul 20, 2006 10:35 pm

My mechanic just opened the bonnet, jacked the engine up, removed the grill and got the rocker shaft out their!

My mechanic is in Harlow, Essex and he doesnt charge much. I can give you his number if its any use (oh he rebuilds top fuel dragster engines for his team over weekends, so I know his works good!).
beadle
E30 Zone Newbie
E30 Zone Newbie
Posts: 37
Joined: Mon Jun 19, 2006 11:00 pm
Location: Brighton

Thu Jul 20, 2006 10:43 pm

Steviec wrote:My mechanic just opened the bonnet, jacked the engine up, removed the grill and got the rocker shaft out their!

My mechanic is in Harlow, Essex and he doesnt charge much. I can give you his number if its any use (oh he rebuilds top fuel dragster engines for his team over weekends, so I know his works good!).
Yes steve! Nice one ! Thats pretty much what my mate did , but he said he loosened the head bolts and got it out like that!!! :? Yeah i know , he has probably mashed up the head gasket? But he seemed to think it was ok?
Andy335Touring
Married to the E30 Zone
Married to the E30 Zone
Posts: 7144
Joined: Sun Jan 09, 2005 11:00 pm
Location: Long Eaton,Nottingham
Contact:

Thu Jul 20, 2006 10:52 pm

Do a compression test as my money is on a bent valve
beadle
E30 Zone Newbie
E30 Zone Newbie
Posts: 37
Joined: Mon Jun 19, 2006 11:00 pm
Location: Brighton

Thu Jul 20, 2006 11:07 pm

Andy335Touring wrote:Do a compression test as my money is on a bent valve
Will do andy , nice one!

Image :cry: :cry:
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49358
Joined: Mon Jan 10, 2005 11:00 pm

Fri Jul 21, 2006 12:08 am

beadle wrote:
he loosened the head bolts and got it out like that
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!
Contact:

Fri Jul 21, 2006 12:25 am

Brianmoooore wrote:
beadle wrote:
he loosened the head bolts and got it out like that
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+1

fit a 325i..
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
Quaser
E30 Zone Addict
E30 Zone Addict
Posts: 2622
Joined: Sun Jan 09, 2005 11:00 pm
Location: West London

Fri Jul 21, 2006 12:43 am

i'd also say got for a 325
BMW E30 2.0 Convertible (M52B28)
BMW E30 2.0 2 Door (M20B28 Turbo project to start)
BMW E36 328i Sport (M52B28 Turbo Project)
http://www.e30zone.net/modules.php?name ... ic&t=68663
User avatar
fowler
Boost Junkie
Posts: 3468
Joined: Mon Jan 10, 2005 11:00 pm
Location: New Addington/Croydon
Contact:

Fri Jul 21, 2006 4:49 am

has to be 2.5 so this 2.0ltr rubbish :D
EX A-Tech Workshop bitch !!!
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
Post Reply