My cold induction+ ITG
Moderator: martauto
-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
Appletree, im planning a rolling road myself as soon as i replace my cambelt.With ITG on, will post results soon as i can.Must say though im more than happy with mine.
-
appletree
- E30 Zone Addict

- Posts: 3479
- Joined: Fri Jan 20, 2006 11:00 pm
- Location: Retford
how long are you goon be before you do that? what cars it on? IS or 325sport? could you post a pic up o the filter i havent seen one yet!
-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
Filter is on a 325i cab mate.If you go to top of this page there should be a
link to pics of the ITG fitted to my car.Still think the box you made looks good.Got a few things to do on car so plan to do a r/r in about a month.
link to pics of the ITG fitted to my car.Still think the box you made looks good.Got a few things to do on car so plan to do a r/r in about a month.
-
appletree
- E30 Zone Addict

- Posts: 3479
- Joined: Fri Jan 20, 2006 11:00 pm
- Location: Retford
cheers found the link, it looks pritty nice is the silver bit alloy? it looks abit bent/twisted in the picture? 
-
bryang
- E30 Zone Regular

- Posts: 352
- Joined: Mon Jan 10, 2005 11:00 pm
Good read Appletree...a breath of fresh air
Your one of the few people who undertake such things and are thorough enough to compare it back to back with the stock set up.
Nice work as well mate
Your one of the few people who undertake such things and are thorough enough to compare it back to back with the stock set up.
Nice work as well mate
-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
It is a bit squashed mate,coule reall y do with a samco hose or similar but thats just for asthetics sake, it actually works as its intended to.Yes it is alloy.appletree wrote:cheers found the link, it looks pritty nice is the silver bit alloy? it looks abit bent/twisted in the picture?
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
I like the ITg filter relly pleased with it

Considering Selling the Cabby, looks like its gonna go
-
Jon_Bmw
- Dangerous when thinking

- Posts: 7604
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Salisbury
30%appletree wrote: i know there was a big thread on this but the man at the RR said he always said 30% drive train loss for a RWD
and 25% for a FWD
Doing the maths:
104bhp @ 17% loss = 121.68
104bhp @ 30% loss = 135.20
So the 30% figure gives almost standard factory flywheel power, but whether he has just said 30% to make you happy i don't know? 30% seems a lot to me, more like 4x4 losses.
-
appletree
- E30 Zone Addict

- Posts: 3479
- Joined: Fri Jan 20, 2006 11:00 pm
- Location: Retford
like is said i dont realy know, the guy at the rolling road wouldnt tell me the fly wheel figure because he said he could only estmate it. and would rather work on "at the wheels power". but in the end he said he though it was about 25% for a front wheel drive and 30% for a RWD. 
-
fowler
- Boost Junkie
- Posts: 3468
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: New Addington/Croydon
appletree could i have a template of your cold air feed please fella
EX A-Tech Workshop bitch !!!
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
FOlwer if u get one wanna help mefowler wrote:appletree could i have a template of your cold air feed please fella

Considering Selling the Cabby, looks like its gonna go
-
fowler
- Boost Junkie
- Posts: 3468
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: New Addington/Croydon
dont se why not it will cost you beer
EX A-Tech Workshop bitch !!!
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
ur on fellafowler wrote:dont se why not it will cost you beer

Considering Selling the Cabby, looks like its gonna go
-
M5pilot
- E30 Zone Addict

- Posts: 4968
- Joined: Sun Jan 30, 2005 11:00 pm
- Location: Luton
Just remember the heat sheild is useless without any insulation. Once the metal gets hot it radiates heat.
I carried out the test again and once moving air temperature in the vacinity of the airfilter is no higher than outsiude air temperature.
Sal
I carried out the test again and once moving air temperature in the vacinity of the airfilter is no higher than outsiude air temperature.
Sal
-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
So what would be the point of a carbon airbox,does it actually cool the air.Not being funny mate but unless airbox cools the air i dont see the need for them.Especially at the price of a carbon one.Looks bloody nice though.M5pilot wrote:Just remember the heat sheild is useless without any insulation. Once the metal gets hot it radiates heat.
I carried out the test again and once moving air temperature in the vacinity of the airfilter is no higher than outsiude air temperature.
Sal
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
how come the zone shop doesn't sell an appropiate heat sheild for this wonder ITG filter/washing sponge. Or come to think of it a proper kit to hold the AFM and air filter in place?M5pilot wrote:Just remember the heat sheild is useless without any insulation. Once the metal gets hot it radiates heat.
I carried out the test again and once moving air temperature in the vacinity of the airfilter is no higher than outsiude air temperature.
Sal
How come this itg is the new wonder product? i thought the BMC airbox was the wizz bang thing, being carbon fibre it will keep the heat out. Or does it not have a trumpet built into it!
Can we see some pictures of this built in trumpet on the itg? Seeing as the trumpet on a standard airbox is probably longer than the itg washing sponge itself im a little lost.
Airfilters are great if u want some induction roar
Last edited by Simon13 on Mon Jul 17, 2006 7:32 pm, edited 1 time in total.
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
Simon if it was the noise i was after i would have kept the K&N that came with my car. Tell you what if you are going to gaydon you can try mine on your car and the make your own mind up.Just a bit biased cos i got mine for £16 and £8 postage off ebay.Simon13 wrote:how come the zone shop doesn't sell an appropiate heat sheild for this wonder ITG filter/washing sponge. Or come to think of it a proper kit to hold the AFM and air filter in place?M5pilot wrote:Just remember the heat sheild is useless without any insulation. Once the metal gets hot it radiates heat.
I carried out the test again and once moving air temperature in the vacinity of the airfilter is no higher than outsiude air temperature.
Sal
How come this itg is the new wonder product? i thought the BMC airbox was the wizz bang thing, being carbon fibre it will keep the heat out. Or does it not have a trumpet built into it!
Can we see some pictures of this built in trumpet on the itg? Seeing as the trumpet on a standard airbox is probably longer than the itg washing sponge itself im a little lost.
Airfilters are great if u want some induction roar
-
M5pilot
- E30 Zone Addict

- Posts: 4968
- Joined: Sun Jan 30, 2005 11:00 pm
- Location: Luton
Oh dear,
Simon13 again.
The E30zone Pratt.
Do you really think anyone takes anything you say seriously anymore??
Come say some of the stuff you say behind my back to me and I will happily re arrange your face. Fukcing keyboard warriors!
Sal
Simon13 again.
The E30zone Pratt.
Do you really think anyone takes anything you say seriously anymore??
Come say some of the stuff you say behind my back to me and I will happily re arrange your face. Fukcing keyboard warriors!
Sal
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
appletree
- E30 Zone Addict

- Posts: 3479
- Joined: Fri Jan 20, 2006 11:00 pm
- Location: Retford
if you are intersted in the sheild i can send you a template on paper to scale but you will have to work out where the hole needs to be as it veries depending on filter length, diameter and ABS unit.
send me a PM with your address and al try and get a template made up when am not at work!.
cheers, for the comment "stuartgallafant"
send me a PM with your address and al try and get a template made up when am not at work!.
cheers, for the comment "stuartgallafant"
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
appletree
- E30 Zone Addict

- Posts: 3479
- Joined: Fri Jan 20, 2006 11:00 pm
- Location: Retford
well, if you do, drop me a PM and and al sort one out for ya! 
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
gooner1
- Out humping Reindeer
- Posts: 13280
- Joined: Fri Apr 14, 2006 11:00 pm
- Location: Northampton.For my sins.
By the way the offer i made to Simon 13 re the itg filter applies to all zoners.After all the help ive had here its the least i can do.
-
stuartgallafant
- E30 Zone Addict

- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
appletree
- E30 Zone Addict

- Posts: 3479
- Joined: Fri Jan 20, 2006 11:00 pm
- Location: Retford
Well i got me ITG filter for M5pilot and fitterd it yesterday.
AND
Am very please with it sounds nice, better response, but still a very very slight hesitate at 2.5K a remap might help to get rid of this.
either way i would recomend one to any IS owner.
cheers for you help SAL

AND
Am very please with it sounds nice, better response, but still a very very slight hesitate at 2.5K a remap might help to get rid of this.
either way i would recomend one to any IS owner.
cheers for you help SAL
-
appletree
- E30 Zone Addict

- Posts: 3479
- Joined: Fri Jan 20, 2006 11:00 pm
- Location: Retford
I,ll get some pics up as soon as i can.
Fowler did you get the template?
Fowler did you get the template?
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
I love my ITG filter it did make a difference i do think i need a chip now though what with the filter and full scorpion exhuast, Maybe my nexted purchase 

Considering Selling the Cabby, looks like its gonna go
-
Incitatus
- E30 Zone Newbie

- Posts: 150
- Joined: Thu Aug 18, 2005 11:00 pm
- Location: Shrewsbury
I've bought a number of ITG filters for various cars, and I currently have a £300 Maxogen kit on my other vehicle. The filter I got from Sal for my 325 has been no exception in the positive difference it makes.
When I was bored a few weeks ago, and after I'd had the ITG fitted for a few months, I fitted the standard airbox to see if how it felt, and the answer was a bit flat! The ITG certainly makes a difference in the top end, without question.
It would be fun to see if a Maxogen kit would fit the E30 though. I tried to fit mine to the 325 but the filter housing is to big and the filter itself has a larger diameter neck
When I was bored a few weeks ago, and after I'd had the ITG fitted for a few months, I fitted the standard airbox to see if how it felt, and the answer was a bit flat! The ITG certainly makes a difference in the top end, without question.
It would be fun to see if a Maxogen kit would fit the E30 though. I tried to fit mine to the 325 but the filter housing is to big and the filter itself has a larger diameter neck

Bought: Obtain in exchange for payment. Brought: Come to a place with (someone or something).
These words are NOT interchangable....!
-
M5pilot
- E30 Zone Addict

- Posts: 4968
- Joined: Sun Jan 30, 2005 11:00 pm
- Location: Luton
Incitatus,
ITG could make a maxogen kit for the E30 if we give them a car.
However, I just don't think it would be worth paying £300+ hence why I never initiated the process myself.
The ITG kit as it is, is more than good enough.
Sal
ITG could make a maxogen kit for the E30 if we give them a car.
However, I just don't think it would be worth paying £300+ hence why I never initiated the process myself.
The ITG kit as it is, is more than good enough.
Sal
-
tim_s
- E30 Zone Squatter

- Posts: 1661
- Joined: Thu Feb 03, 2005 11:00 pm
- Location: Bristol/London
appletree, on the r/r stuff. rollers vary a lot so its difficult to compare figuers with other people. mine made 106/7 atw in 4th gear on a perfectly healthy 1.8 engine (been diag'd, compression tested etc and has since been disassembled - was def running 100%), with motronic and just simple mods - eleccy fan, stainless zorst etc. so reckon yours is about right.
-
fowler
- Boost Junkie
- Posts: 3468
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: New Addington/Croydon
apple tree got the template fella need to get ypoua beer fo it you going the pod come find me an i will merrly had you some beer !!!!
STU got it at home going to to see a sheet metal fella to geta couple knocked up used sticky back plastic to coat the metal in for heat resistance and a bit of tin foil over the top aswell just for good measure to stop alll this crap about it heating up its by the grill and yes a certian amount of deflection of heat will effect you cone filter my best bet is to modify the orignal airbox by taking the trumpet out and mounting a confilter inside the original housing as it makes the same noise as if not having the housing there at all not sure on power gains
all i can say for N/A the more easily the car can brethe the mor power gain.
Large freeflow inlet to freeflowing exhaust car is able to perform better
STU got it at home going to to see a sheet metal fella to geta couple knocked up used sticky back plastic to coat the metal in for heat resistance and a bit of tin foil over the top aswell just for good measure to stop alll this crap about it heating up its by the grill and yes a certian amount of deflection of heat will effect you cone filter my best bet is to modify the orignal airbox by taking the trumpet out and mounting a confilter inside the original housing as it makes the same noise as if not having the housing there at all not sure on power gains
all i can say for N/A the more easily the car can brethe the mor power gain.
Large freeflow inlet to freeflowing exhaust car is able to perform better
EX A-Tech Workshop bitch !!!
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
325i Turbo touring (Aka Project Fridge)
gone but not forgotten
-
Dave_M3
- E30 Zone Addict

- Posts: 3428
- Joined: Sat Jun 24, 2006 11:00 pm
- Location: Cork
Nice job lad. looks excellent. Ye were talkin bout seeling the top. Perpex would probally be the easiest nd bst option.



