Can anyone tell me what size spiggots i gota get..? need um urgently
cheers
Spiggot ring/Hub size??
Moderator: martauto
-
JAMZ
- E30 Zone Camper
- Posts: 1214
- Joined: Wed May 25, 2005 11:00 pm
- Location: Portsmouth
Last edited by JAMZ on Fri Jul 07, 2006 8:40 pm, edited 1 time in total.
-
JAMZ
- E30 Zone Camper
- Posts: 1214
- Joined: Wed May 25, 2005 11:00 pm
- Location: Portsmouth
Anyone..?
need to know the hub sizes of the E30 asap..and hope where im going tommorrow keeps that type in stock
or its another weekend not being able to drive the car.
need to know the hub sizes of the E30 asap..and hope where im going tommorrow keeps that type in stock
or its another weekend not being able to drive the car.-
telski789
- E30 Zone Camper
- Posts: 1114
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Northants
hi,im sure all e30 hubs are the same but i know that if you have a 325i the hubs are 57mm,the outside diameter of the rings depends on the wheels,mine needed an outside measurement of 60mm,meaning mine are very thin! so,measure the hole in the wheel where the hub go's and you'll know your size. also,mention the make of the wheels as the rings are best to come from the maker of the wheels as the vary in design....hope that helps,also,i have a couple of sets of rings so let me know what your after...
Tel
Tel
-
JAMZ
- E30 Zone Camper
- Posts: 1214
- Joined: Wed May 25, 2005 11:00 pm
- Location: Portsmouth
Well im fitting RH Toplines to the CaB but they havent got Spigots included..
So basicaly the inside is 57mm
and the outside measurment would be the centre diameter of the wheel..
I just mesured the centre hole diameter and its 57mm too
So basicaly the inside is 57mm
and the outside measurment would be the centre diameter of the wheel..
I just mesured the centre hole diameter and its 57mm too
-
telski789
- E30 Zone Camper
- Posts: 1114
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Northants
you dont need rings then!! have you tried them on yet?!!
-
JAMZ
- E30 Zone Camper
- Posts: 1214
- Joined: Wed May 25, 2005 11:00 pm
- Location: Portsmouth
Thats what im hopeing.. no hanvet tried em yet.. pretty sure these came off a VW so i assumed i would need spigots as i thought they had different size hubs?
-
slideways
- E30 Zone Newbie
- Posts: 108
- Joined: Mon May 30, 2005 11:00 pm
- Location: Sligo, EIRE
put them on and get shop us apic when you done..!!!
-
telski789
- E30 Zone Camper
- Posts: 1114
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Northants
im sure vw golf hubs are bigger,infact,my mates had to have rings at the back but not the front on his,coz the front and rear hubs were different sizes!
Tel
Tel
-
massive
- E30 Zone Regular
- Posts: 965
- Joined: Thu Aug 04, 2005 11:00 pm
JAMZ wrote:Well im fitting RH Toplines to the CaB but they havent got Spigots included..
So basicaly the inside is 57mm
and the outside measurment would be the centre diameter of the wheel..
I just mesured the centre hole diameter and its 57mm too
Excellent choice of rims - your cabby is gonna to look 
as fcuk!I need rings for my toplines on my 91 sport if that helps, but not sure on the sizes
-
panesar_e30
- E30 Zone Squatter
- Posts: 1579
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: bucks
wassup jamz, you may need spiggot rings depending on what car they came off. as long as they fit tight on the hub you will be fine, if not, you will get severe juddering. hope this helps! 