Any Tip's on Fitting a Tech 1 Kit??

[cliffybabe]

Hi Guys

I've bought a tech 1 kit off a quality fellow zoner, which will be here soon, i wanted to know how many people have put this kit after market??

Thanks

Neil

[Theo]

Ive fitted it, it has its tricky moments but isn't too difficult. I used carbond to fit the sideskirts, as opposed to drilling the body work - which I would recomment doing (you also need to use the clamps on the sill seam as shown in the etk diagrams). The front and rears are fairly straightforward, but would take all night to describe in detail the process for removal and fitting. If you have any problems just post up here and I should be able to help!

[cliffybabe]

cheers theo its alreayd been removed onc, it get here a quick clean and see how it matched up to my paint work if cool it will go on if not quick spray up thne it will go on

[cliffybabe]

no one else got any helpful hints????

[Theo]

One thing that is important to remember is that you must have the correct rear bumper rubber end caps when you fit you rear skirt. The standard ones are no use as they foul the mtech skirt. Hopefully you will have got these with your kit, otherwise you will have fun and games trying to track a pair down.

[cliffybabe]

oh, i didnt know that one