scuttle air vents
Moderator: martauto
-
appletree
- E30 Zone Addict
- Posts: 3479
- Joined: Fri Jan 20, 2006 11:00 pm
- Location: Retford
Does anyone know how to remove the air inlet vents in the scuttle also how are the door rubbing strips held onto the door on a 318is cant look at mine as i am on a job with the works van stuck in a hotel bored
-
Chris-W
- E30 Zone Team Member
- Posts: 7219
- Joined: Tue May 24, 2005 11:00 pm
- Location: South Cheshire
Scuttle vents are careful prising with a flat tool.
Door strips have a 10mm plastic nut inside the rear inside face of the door and then slid/pulled off their clips.
Door strips have a 10mm plastic nut inside the rear inside face of the door and then slid/pulled off their clips.
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
From the bottom. Three spring clips.Chris-W wrote:Scuttle vents are careful prising with a flat tool.
.
-
smithy318i
- Engaged to the E30 Zone
- Posts: 5797
- Joined: Thu Apr 28, 2005 11:00 pm
- Location: Tyne & Wear
http://www.e30zone.co.uk/modules.php?na ... highlight=Brianmoooore wrote:From the bottom. Three spring clips.Chris-W wrote:Scuttle vents are careful prising with a flat tool.
.
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
Just looked at the link. I just lever up the spring clips at the bottom, but I suppose you can unhook the top fixed clips if you can slide the whole thing downwards and compress the spring clips enough. Possibly slightly less chance of paint damage.