failed mot on my stupidity!
Moderator: martauto
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
i took my touring for its first mot since i bought it ,when i bought the car from a dealer i suspected the mot was a duff one as bits didnt work so i was dreading this one,especially considering the cutting and reshaping of the front chassis legs to accomodate the engine conversion. it failed on the angel eye headlights i bought being for a left hand drive car.i obviously didnt check when i bought them of e-bay.still i suppose i should be grateful it was only that 
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
assuming these are based on bmw bits, you can rotate the light in the housing to convert from LDH to RHL setup...
fingers crossed mate!
fingers crossed mate!
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
ill hold off ordering a new set until ive checked that out then.they came as complete units already fitted to the metal sub frame and looked exactly like the standard set up.that would certainly be a bonus,thanks mate 
-
stevo
- E30 Zone Regular

- Posts: 984
- Joined: Sun Mar 06, 2005 11:00 pm
- Location: Kilmarnock, scotland
thats not bad going at all after all the altering thats went on!
-
gareth
- E30 Zone Team Member

- Posts: 11005
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: hastings, east sussex
just had a search:
http://www.e30zone.co.uk/modules.php?na ... ving+right
http://www.e30zone.co.uk/modules.php?na ... ontinental
i've seen something better somewhere, may be the manual. worth a look if you have one!
http://www.e30zone.co.uk/modules.php?na ... ving+right
http://www.e30zone.co.uk/modules.php?na ... ontinental
i've seen something better somewhere, may be the manual. worth a look if you have one!
Sole founder of Fe2O3-12V it's a lifestyle

LSD rebuilding / modification services provided, PM for details

LSD rebuilding / modification services provided, PM for details
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
quality,problem solved i think.there was 2 bald tyres on the rear but thats just wear and tear caused by my propshaft 'testing'
nothing to bother about at all 
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
you were right enough mate,they are reversable 
-
Sanchez
- Married to the E30 Zone

- Posts: 7578
- Joined: Sun Apr 17, 2005 11:00 pm
- Location: Sunny Scotland
nice one. i need to change my lights cause cant adjust them but the screws are completly f88ked. No amount of wd40 is working, not even my impact wrench.
-
fuzzy
- He who sleeps with "Gingers"
- Posts: 14351
- Joined: Sat Jun 04, 2005 11:00 pm
- Location: melbourne Australia
i had the same problem and the insides where tarnished,thats why i bought the angel eyes because it was cheaper than replacing the lights with standard items.
