Does it matter which way round the front springs are fitted ?
Do they have a "Top and Bottom" ?
Quick H&R 60/40 Cup Kit Question
Moderator: martauto
-
kam-325i
- E30 Zone Team Member
- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
-
bigdek
- E30 Zone Camper
- Posts: 1115
- Joined: Thu Feb 10, 2005 11:00 pm
- Location: Fife Scotland
yes .
make sure the writing is the correct way up
make sure the writing is the correct way up
-
kam-325i
- E30 Zone Team Member
- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
So the "Tighter" wound part of the spring is the top.
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
-
Geeman
- Married to the E30 Zone
- Posts: 7641
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Grimsby, Lincolnshire
The top of the spring should be flat... where as with the bottom part, the end of the coil 'should' sit into the indentation in the shock cup... make sense?
-
kam-325i
- E30 Zone Team Member
- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
Neither end of the front springs have been made flat.
The coils are tighter on one end, would this be the top ?
The coils are tighter on one end, would this be the top ?
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
-
M5pilot
- E30 Zone Addict
- Posts: 4968
- Joined: Sun Jan 30, 2005 11:00 pm
- Location: Luton
Just read the writing, it needs to be the right way up.
The shorter coils go at the top.
The shorter coils go at the top.
