Just a quick call to the experts on Emerald and MS.
What system requirements are needed on the PC/Laptop to run the software with either of the management systems?
Ive just got hold of a basic Laptop, but I dont know if it will run the software ok or if it will need more RAM etc.
Cheers
Emerald / MS software
Moderator: martauto
-
Andy335Touring
- Married to the E30 Zone

- Posts: 7144
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Long Eaton,Nottingham
- Contact:
You only need a basic lap top that runs on windows i think for Emerald, i guess MS will be the same ?
-
Turbo-Brown
- Boost Junkie
- Posts: 4705
- Joined: Tue Feb 15, 2005 11:00 pm
- Location: Aldershot, Hants
- Contact:
Yeah, as long as it's got an RS232 connection and can run windows (95 onwards I think) you'll be fine.
Just make sure there's nothing installed that uses the COM port as that causes all sorts of problems!
Just make sure there's nothing installed that uses the COM port as that causes all sorts of problems!
Cheers guys.
Yeah, its a bit old and basic and has the serial port, but it was at my favourite price - free
It was built for Windows 98/NT and was running 98. Ive just installed Windows ME because 98 didnt like my Broadband connection and it seems to be running fine with ME installed.
I just wondered if there were any minimum system requirements like processor speed or RAM etc.
Yeah, its a bit old and basic and has the serial port, but it was at my favourite price - free
It was built for Windows 98/NT and was running 98. Ive just installed Windows ME because 98 didnt like my Broadband connection and it seems to be running fine with ME installed.
I just wondered if there were any minimum system requirements like processor speed or RAM etc.
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
Turbo-Brown
- Boost Junkie
- Posts: 4705
- Joined: Tue Feb 15, 2005 11:00 pm
- Location: Aldershot, Hants
- Contact:
Think the software for the mapping is pretty basic, my laptop seems happy enough running it with a 200MHz processor and 64Mb of RAM!
Mine is a P1 133mhz 32MB win98 (starts from cold in about 15 seconds tho
)
The software only needs win9x up.
The software only needs win9x up.

Hi guys,
Just saw this thread.. what cable do i need and where can i get a copy of the software..??
Thanks
Just saw this thread.. what cable do i need and where can i get a copy of the software..??
Thanks

-
Morat
- E30 Zone Team Member

- Posts: 8943
- Joined: Thu Feb 09, 2006 11:00 pm
- Location: The Peoples Republic of Yorkshire
Windows ME is the spawn of satan... but if it works for you - great 
Can MS use a USB to serial adaptor?
Can MS use a USB to serial adaptor?
E30 Touring 0.35 cD - more slippery than prison soap 

Praise the Lard... and pass the dripping!

Praise the Lard... and pass the dripping!
I have to admit, I didnt like it when a mate first got it years back, but then I never wanted XP either - I was happy with 98Morat wrote:Windows ME is the spawn of satan... but if it works for you - great
Only got XP because the guy who built my PC installed XP by mistake, so I got it for free, although I cant update it at the moment because my product code isnt valid
One advantage to ME - invalid product code and I can still update it
Just had my mate on the phone and the Laptop is a Celeron 333Mhz with 128Mb ram, so that should be fine and dandy for the MS or Emerald stuff
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
Ant
- Retired Team Member

- Posts: 10496
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: PD+E dept :D
- Contact:
yes, but there are exceptions.... check out DIYautotune site for more infoCan MS use a USB to serial adaptor?
Product Development and Endurance for Delphi.
Original performance chips, original works not unlicensed copies
Email FTW
Original performance chips, original works not unlicensed copies

