Hi to all 335i owners.
just started to strip down my e34 535i sport to remove the engine,
just afew qeustions.
Is there any info on the wiring setup i will need to use on the forum?
Also what do i do about the abs system which is fitted?
Cheers Andy Gall.
M30 Wiring info.
Moderator: martauto
-
gall
- E30 Zone Newbie
- Posts: 189
- Joined: Thu Jul 07, 2005 11:00 pm
- Location: DARLINGTON, NORTH EAST.
-
ed325i
- E30 Zone Addict
- Posts: 4146
- Joined: Mon Jan 10, 2005 11:00 pm
Take the 535 engine loom from the 535. remove your e30 loom and fit the 535 one in its place you will have to turn the ecu round because the loom will be a bit short for the e30 . plug the round plug in and the coil wires will have to be made longer.
The Abs is not connected to the engine loom.
ed
The Abs is not connected to the engine loom.
ed
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49359
- Joined: Mon Jan 10, 2005 11:00 pm
Not quite true. One of the ABS main powers comes from the engine loom via pin 20 of the C101, (red/yellow). Comes from pin 87 of the DME relay.ed325i wrote: The Abs is not connected to the engine loom.
ed