full rebush - whats needed/general suggestions?

Need technical Q/A then you're in the right place

Moderator: martauto

liam012
E30 Zone Camper
E30 Zone Camper
Posts: 1424
Joined: Sun Aug 28, 2005 11:00 pm

Post Fri Jun 02, 2006 8:14 pm

exhaust, gearbox and petrol tank are comming down soon and i'm changing the trailing aarms to discs on my 320i- i want to rebush the whole of the car and am trying to think of all of the bushes i need. also advice on wether to go eccentric or not and wether to go gsf or dealer would be grweat thanks.

Front ARB x2
Rear Arb x2
front lower wishbone bushings x2
drop/sway bar links front x2 (just buy new ones rebushed or 4 bushes?)
arb drop links rear x2 (just buy new ones rebushed or 4 bushes?)
rear sub frame bushes x2
rear trailing arm bushes x4 (i now need 325i bushes not 320i or are they the same?)

poly bushes are a no no as i live in the country in ireland and the roads aren't great - the ride is quite firm on the h&r kit alredy.

thanks again
M5pilot
E30 Zone Addict
E30 Zone Addict
Posts: 4968
Joined: Sun Jan 30, 2005 11:00 pm
Location: Luton

Post Fri Jun 02, 2006 8:26 pm

Use Poly bushes on the lower control arms as they wont make any difference to harshness at all. Even if you dont go Poly get the eccentric lower arm bushes.
stonesie
E30 Zone Addict
E30 Zone Addict
Posts: 3277
Joined: Sat Jan 07, 2006 11:00 pm
Location: Doncaster

Post Sat Jun 03, 2006 2:13 pm

the clamps for the front arb bushes are about £1 each... would replace these as 1 of mine rusted and snapped.
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Sat Jun 03, 2006 4:02 pm

engine mounts
gearbox mounts

front top mounts are pretty tough

rear top mounts E46 M3 cab ones

eccentric rear trailing arm bushes, reduces neggy camber on lowered cars

£25 for a pair u need 4

centre propshaft bearing is also worth changing while your there, imo

big bush on the diff back plate? go for the ZM3 coupe one, again fits and much stronger than normal E30 ones

i would stick to rubber bmw bushes personnally, poly ones dry out after a few years and sqweek.

outer track rod ends too? ( ball joints on them)

hth
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Sat Jun 03, 2006 9:38 pm

Simon13 wrote:eccentric rear trailing arm bushes, reduces neggy camber on lowered cars

£25 for a pair u need 4

Where do you get these Simon? Never heard of any before
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Sun Jun 04, 2006 12:38 pm

the main dealer Dan
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Sun Jun 04, 2006 1:17 pm

So what were they fitted to etc?
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Sun Jun 04, 2006 5:20 pm

they weren't but they are available so don't worry!

just like adjustible top mounts are available from the main dealer!
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Sun Jun 04, 2006 5:37 pm

So its not something that can be looked up on realoem :?
Know how much they are?
Simon13
The longest resto in the world !
Posts: 22697
Joined: Mon Jan 10, 2005 11:00 pm
Location: Camberley, Surrey don't u know

Post Sun Jun 04, 2006 11:22 pm

as i said £25 for a pair u need 4!