clutch problem............. HELP

Need technical Q/A then you're in the right place

Moderator: martauto

TW166Y
E30 Zone Addict
E30 Zone Addict
Posts: 3118
Joined: Wed Jun 08, 2005 11:00 pm
Location: Stoke (Clayheads)

Post Sun May 28, 2006 8:24 pm

Right im not to clever when it comes to clutches or much else come to think of it :P anyway my clutch started to diassapear on me yesterday, i thought nothing of it... dont ask me why :mad: came to start her up this orning and pressed in clutch and again, felt very soft and the clutch didnt come back up, the bite on the clutch was right at the bottom of the pedal, causeing it to jerk forward like anything because its too hard to control! i was installing my ice stuff this afternoon and had the drivers colum trim off and i saw that the clutch pedal was really damp, i dipped the clutch and there it was, "the problem" while the clutch was pressed it was ousing out clutch fluid all under my mats and has now absolutly soaked my carpet! seems to be leaking from a rubber boot of some sort... any ideas fellas?

thanks :wink:
Image
Saying goodbye to 4-pot wrongness
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Sun May 28, 2006 8:28 pm

that'll be the seal on the clutch master cylinder twigg...

GSF, Euro Car Pants, and other places do them for about £20-30 i think. not too bad a job
Image
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun May 28, 2006 8:33 pm

Change the slave at the same time, or you'll be doing it a fortnight later.
stuartgallafant
E30 Zone Addict
E30 Zone Addict
Posts: 4531
Joined: Tue Mar 29, 2005 11:00 pm
Location: Costa del Croydon

Post Sun May 28, 2006 8:34 pm

yeah, heard of this happening a lot!! dont forget to bleed the system properly too. and use dot4 brake fluid
Image
dobbie82
E30 Zone Addict
E30 Zone Addict
Posts: 4125
Joined: Thu May 05, 2005 11:00 pm
Location: Dolgellau, Wales (NOT A TRADER,broken a car,got lots of bits)

Post Sun May 28, 2006 8:36 pm

Brianmoooore wrote:Change the slave at the same time, or you'll be doing it a fortnight later.
yep, like the master says... get them both done at the same time!

Mine lasted oh about 10 days! (did slave first, then master) But I got it done at a garage so wasnt cheap!
e30 related ebay auctions + shop(MY Stuff for Sale), http://tinyurl.com/64aufr
My Feedback on the e30zone: http://tinyurl.com/dobbie82feedback
TW166Y
E30 Zone Addict
E30 Zone Addict
Posts: 3118
Joined: Wed Jun 08, 2005 11:00 pm
Location: Stoke (Clayheads)

Post Mon May 29, 2006 1:37 am

thanks everyone... ill get onto this tomorrow if my machanic is working :? bank holiday and all... i think a zoner offered to do it for me but ive lost the pm now :?
Image
Saying goodbye to 4-pot wrongness