OBC Red & White Wire ??????

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
alan325i
E30 Zone Regular
E30 Zone Regular
Posts: 369
Joined: Mon Feb 14, 2005 11:00 pm
Location: Yardley, Birmingham

Post Sun May 28, 2006 10:54 am

Just about to fit the temp sensor to OBC But have found that i have 2 Red & White Wires which are connected together where do these go?

Thanks
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun May 28, 2006 3:29 pm

If these red/white wires are any way near the glove box area the the plug goes into the accessories socket, 2nd row from the left, second pin up.
Without digging the circuit diagram out, I presume it's power for the alarm horn.
User avatar
alan325i
E30 Zone Regular
E30 Zone Regular
Posts: 369
Joined: Mon Feb 14, 2005 11:00 pm
Location: Yardley, Birmingham

Post Sun May 28, 2006 3:36 pm

ok thanx for reply, so dont really need to connect this as it doesnt have a BMW Alarm.

Thanx
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49360
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun May 28, 2006 3:51 pm

Not a seperate BMW alarm; the one built into the OBC.(CODE)