Noise after steering rack conv.

Need technical Q/A then you're in the right place

Moderator: martauto

bottlecapE30
E30 Zone Regular
E30 Zone Regular
Posts: 481
Joined: Tue Jan 11, 2005 11:00 pm
Location: Baltimore, MD USA

Post Wed May 24, 2006 4:20 am

I recently replaced my old steering rack with a e36 rack and new bavauto springs and touring shocks from Bilstein. I have a odd popping noise in the front when i go from lock to lock at frist i thought it was a loose tie rod but they are tight. :x the sound is like the new springs are binding? any clues i just can't figure it out
Image
1987 2.7l e30 m20b27 supercharging
1991 3.5l e30 m30b35 it is dead so sad
1985 3.5l e23 m30b35
Project_E30
E30 Zone Camper
E30 Zone Camper
Posts: 1107
Joined: Thu Jan 13, 2005 11:00 pm

Post Wed May 24, 2006 11:53 am

Outer ball joint
bottlecapE30
E30 Zone Regular
E30 Zone Regular
Posts: 481
Joined: Tue Jan 11, 2005 11:00 pm
Location: Baltimore, MD USA

Post Wed May 24, 2006 11:01 pm

is that the boot at the end of the tie rod. if so i don't think that is it as they are new tierods. Any other guesses as it is now making the noise around every turn. :cry:
Image
1987 2.7l e30 m20b27 supercharging
1991 3.5l e30 m30b35 it is dead so sad
1985 3.5l e23 m30b35
Project_E30
E30 Zone Camper
E30 Zone Camper
Posts: 1107
Joined: Thu Jan 13, 2005 11:00 pm

Post Thu May 25, 2006 7:16 am

Image

The ball joints are what items 5 & 6 bolt onto.