Audi Gauges
Moderator: martauto
-
Quaser
- E30 Zone Addict

- Posts: 2622
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: West London
Hi Guys
Has anyone fitted a set of audi gauges to their e30's?
If so, how do you get the oil pressure and oil temp setup, and where do you tap into the signal for them?
Thanks
Q
Has anyone fitted a set of audi gauges to their e30's?
If so, how do you get the oil pressure and oil temp setup, and where do you tap into the signal for them?
Thanks
Q
BMW E30 2.0 Convertible (M52B28)
BMW E30 2.0 2 Door (M20B28 Turbo project to start)
BMW E36 328i Sport (M52B28 Turbo Project)
http://www.e30zone.net/modules.php?name ... ic&t=68663
BMW E30 2.0 2 Door (M20B28 Turbo project to start)
BMW E36 328i Sport (M52B28 Turbo Project)
http://www.e30zone.net/modules.php?name ... ic&t=68663
-
Widge
- E30 Zone Addict

- Posts: 3661
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Leeds
Ive collected all the parts and will be doing this mod when I cahnge the clutch and gearbox on my touring.
You use an M3 tempsensor in place of the sump plug for the oil temp, and a VW /Audi pressure sensor in the block with the right adaptor for the pressure, it also has a connection for the idiot light on the dash, so there is no need for tee pieces etc. And that's about it.
You use an M3 tempsensor in place of the sump plug for the oil temp, and a VW /Audi pressure sensor in the block with the right adaptor for the pressure, it also has a connection for the idiot light on the dash, so there is no need for tee pieces etc. And that's about it.
-
panesar_e30
- E30 Zone Squatter

- Posts: 1579
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: bucks
karan had these audi 80 vdo guages fitted to his car, he should be able to help you quaser. 
-
Widge
- E30 Zone Addict

- Posts: 3661
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Leeds
IF you need any help mate with the sensors or wiring, just drop me an email widgeewo@btinternet.com
-
Quaser
- E30 Zone Addict

- Posts: 2622
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: West London
email sent to widge
BMW E30 2.0 Convertible (M52B28)
BMW E30 2.0 2 Door (M20B28 Turbo project to start)
BMW E36 328i Sport (M52B28 Turbo Project)
http://www.e30zone.net/modules.php?name ... ic&t=68663
BMW E30 2.0 2 Door (M20B28 Turbo project to start)
BMW E36 328i Sport (M52B28 Turbo Project)
http://www.e30zone.net/modules.php?name ... ic&t=68663
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Got a pic of these Widge? 
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Nice
Better than a heater vent that never gets used
-
stevetigger
- E30 Zone Addict

- Posts: 4659
- Joined: Thu Feb 24, 2005 11:00 pm
Im thinking in front of ash trayDanThe wrote:NiceBetter than a heater vent that never gets used
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
But then where would all the crap go 
-
DanThe
- E30 Zone Team Member

- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
I meant crap as in general, change, phone, keys, all that stuff that needs to go in a hole 
-
maxfield
- Old Skooler

- Posts: 15185
- Joined: Sat Nov 26, 2005 11:00 pm
- Location: Mansfield
In your pocket 

-
stevetigger
- E30 Zone Addict

- Posts: 4659
- Joined: Thu Feb 24, 2005 11:00 pm
Hole would stay, I meant in front of the hole thing, (key money junk) holderDanThe wrote:I meant crap as in general, change, phone, keys, all that stuff that needs to go in a hole
-
GDBN
- E30 Zone Camper

- Posts: 1415
- Joined: Fri Apr 08, 2005 11:00 pm
- Location: Copenhagen
I've just ordered a voltmeter and oil temp gauge. New VDO ones from a german site. 100 euro including delivery for both and a temp sender.
I thought the same as Steve ... the panel under the heater controls should be fine. You can take a feed from the ashtray light for the internal lights. Just wondering where the best place is to wire in the voltmeter as I use the fag lighter pos for my heated seats.
Giles
I thought the same as Steve ... the panel under the heater controls should be fine. You can take a feed from the ashtray light for the internal lights. Just wondering where the best place is to wire in the voltmeter as I use the fag lighter pos for my heated seats.
Giles
-
liam012
- E30 Zone Camper

- Posts: 1424
- Joined: Sun Aug 28, 2005 11:00 pm
any pics floating about with these installed in the e30?
will they squeeze into the centre air vent area?
look really nice and very well suited to e30 interior.
will they squeeze into the centre air vent area?
look really nice and very well suited to e30 interior.
-
Widge
- E30 Zone Addict

- Posts: 3661
- Joined: Tue Jan 11, 2005 11:00 pm
- Location: Leeds
Away for the weekend, will get back to you guys on monday re emails. Heres dodgy photos of mine installed
http://www.e30zone.co.uk/modules.php?na ... light=audi
http://www.e30zone.co.uk/modules.php?na ... light=audi
-
liam012
- E30 Zone Camper

- Posts: 1424
- Joined: Sun Aug 28, 2005 11:00 pm
cheers
they're nice allright
they're nice allright
